Meter / Gauge System -- Problem Symptoms Table |
- HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
| Symptom | Suspected Area | See page |
| Entire combination meter assembly does not operate | Refer to "Entire Combination Meter does not Operate" | LandCruiser RM0000012GC0B6X.html |
| Meter illumination is always dark | Refer to "Meter Illumination is Always Dark" | LandCruiser RM000001W8R094X.html |
| Meter illumination does not dim at night | Refer to "Meter Illumination does not Dim at Night" | LandCruiser RM000002ZMC01XX.html |
| Operating light control rheostat does not change light brightness | Refer to "Operating Light Control Rheostat does not Change Light Brightness" | LandCruiser RM000002ZMA02PX.html |
| Symptom | Suspected Area | See page |
| Speedometer malfunction | Refer to "Speedometer Malfunction" | LandCruiser RM0000012GD0BAX.html |
| Tachometer malfunction | Refer to "Tachometer Malfunction" | LandCruiser RM000000V7U0CVX.html |
| Fuel receiver gauge malfunction | Refer to "Fuel Receiver Gauge Display Malfunction" | LandCruiser RM0000030W502CX.html |
| Engine coolant temperature malfunction | Refer to "Engine Coolant Temperature Receiver Gauge Malfunction" | LandCruiser RM0000012GF0BOX.html |
| ODO/TRIP meter malfunction | Refer to "Odo/Trip Switch Malfunction" | LandCruiser RM000001YAM02WX.html |
| Symptom | Suspected Area | See page |
| FRONT FOG indicator light does not come on*1 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Lighting system | LandCruiser RM000000PKJ0SFX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| REAR FOG indicator light does not come on*2 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Lighting system | LandCruiser RM000000PKJ0SFX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| BEAM indicator light does not come on | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Lighting system | LandCruiser RM000000PKJ0SFX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Turn signal indicator light malfunction | Lighting system | LandCruiser RM000000PKJ0SFX.html |
| Harness or connector | - | |
| Turn signal flasher assembly | LandCruiser RM000003QVF01KX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| FUEL warning light does not come on (Fuel receiver gauge operates normally) | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Brake warning light does not come on | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Harness or connector | - | |
| Master cylinder reservoir sub-assembly (brake fluid level warning switch) | LandCruiser RM000002WF2056X.html | |
| Proceed to "Brake Warning Light Come ON" (for Hydraulic Brake Booster) | LandCruiser RM00000451R01KX.html | |
| Proceed to "Brake Warning Light Come ON" (for Vacuum Brake Booster, 2TR-FE) | LandCruiser RM000000YHH0K7X.html | |
| Proceed to "Brake Warning Light Come ON" (for Vacuum Brake Booster, 5L-E) | LandCruiser RM000000YHH0K6X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Brake warning light does not go off | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Harness or connector | - | |
| Master cylinder reservoir sub-assembly (brake fluid level warning switch) | LandCruiser RM000002WF2056X.html | |
| Proceed to "Brake Warning Light Remains ON" (for Hydraulic Brake Booster) | LandCruiser RM00000451R01KX.html | |
| Proceed to "Brake Warning Light Remains ON" (for Vacuum Brake Booster, 2TR-FE) | LandCruiser RM000000YHH0K7X.html | |
| Proceed to "Brake Warning Light Remains ON" (for Vacuum Brake Booster, 5L-E) | LandCruiser RM000000YHG0KEX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| SRS warning light does not come on | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Proceed to "SRS Warning Light does not Come ON" | LandCruiser RM000000YE30LIX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| SRS warning light does not go off | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Proceed to "SRS Warning Light does not Remains ON" | LandCruiser RM000000YE20MHX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| DOOR warning light does not come on | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Proceed to "Door Courtesy Switch Circuit" | LandCruiser RM0000011T30D0X.html | |
| Proceed to "Back Door Courtesy Switch Circuit" | LandCruiser RM000002WL802EX.html | |
| Main body ECU | LandCruiser RM000003WBO05FX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| CHARGE warning light does not come on*3 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Charging system (for 1GD-FTV) | LandCruiser RM000000YEF0N4X.html | |
| Charging system (for 2TR-FE) | LandCruiser RM000000YEF0MVX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| CHARGE warning light does not come on*4 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Harness or connector | - | |
| Generator assembly (for 1GR-FE) | LandCruiser RM000001ONN095X.html | |
| Generator assembly (for 1KD-FTV) | LandCruiser RM0000016HA01HX.html | |
| Generator assembly (for 5L-E) | LandCruiser RM0000014FC00KX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| MIL (Malfunction Indicator Lamp) malfunction | Proceed to "MIL Circuit" (for 1GR-FE) | LandCruiser RM000000WZ11A7X.html |
| MIL Circuit (for 2TR-FE) | LandCruiser RM000000WZ11AGX.html | |
| Proceed to "MIL CircuitW (for 1KD-FTV) | LandCruiser RM000000WZ11A8X.html | |
| Proceed to "MIL Circuit" (for 1GD-FTV) | LandCruiser RM000000WZ11B9X.html | |
| Proceed to "MIL Circuit" (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM000000WZ11ASX.html | |
| Proceed to "MIL Circuit" (for 5L-E) | LandCruiser RM000000ZQY02CX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Front seat belt warning light does not come on | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Proceed to "Driver Side Seat Belt Warning Light does not Operate" | LandCruiser RM0000014DK0G0X.html | |
| Proceed to "Front Passenger Side Seat Belt Warning Light Malfunction" | LandCruiser RM0000014DL0FBX.html | |
| ABS warning light does not come on | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Proceed to "ABS Warning Light Come ON" (for Hydraulic Brake Booster) | LandCruiser RM00000451P01IX.html | |
| Proceed to "ABS Warning Light Come ON" (for Vacuum Brake Booster, 2TR-FE) | LandCruiser RM000000XIQ0K7X.html | |
| Proceed to "ABS Warning Light Come ON" (for Vacuum Brake Booster, 5L-E) | LandCruiser RM000000YHH0K6X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| ABS warning light does not go off | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Proceed to "ABS Warning Light Remains ON" (for Hydraulic Brake Booster) | LandCruiser RM00000451O01IX.html | |
| Proceed to "ABS Warning Light Remains ON" (for Vacuum Brake Booster, 2TR-FE) | LandCruiser RM000000XIH0KFX.html | |
| Proceed to "ABS Warning Light Remains ON" (for Vacuum Brake Booster, 5L-E) | LandCruiser RM000000XIH0KEX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| PPS warning light malfunction*5 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Power steering system | LandCruiser RM00000274T0AWX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| SLIP indicator light does not come on*6 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Proceed to "Slip Indicator Light Come ON" (for Hydraulic Brake Booster) | LandCruiser RM00000451T01GX.html | |
| Proceed to "Slip Indicator Light Come ON" (for Vacuum Brake Booster, 2TR-FE) | LandCruiser RM000000YHJ0FSX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| SLIP indicator light does not go off*6 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Proceed to "Slip Indicator Light Remains ON" (for Hydraulic Brake Booster) | LandCruiser RM000000YHI0FTX.html | |
| Proceed to "Slip Indicator Light Remains ON" (for Vacuum Brake Booster) | LandCruiser RM000000YHI0FTX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Cruise indicator light does not come on*7 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Proceed to "Cruise Main Indicator Light Circuit" | LandCruiser RM0000044AT01WX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Cruise set indicator light does not come on*7 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Proceed to "Cruise SET Indicator Light Circuit" | LandCruiser RM0000044B703SX.html | |
| Proceed to "Cruise SET Indicator Light Circuit" (w/ Dynamic Radar Cruise Control System) | LandCruiser RM0000044KA01MX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Radar cruise indicator light does not come on*8 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Proceed to "Cruise Main Indicator Light Circuit" | LandCruiser RM0000044AT01WX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Master warning light does not come on | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| A/T shift indicator light does not come on*9 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Automatic transmission system (for A750F, 1KD-FTV) | LandCruiser RM000000W6Z162X.html | |
| Automatic transmission system (for AC60F, 1GR-FE) | LandCruiser RM000000W6Z16EX.html | |
| Automatic transmission system (for AC60F, 2TR-FE) | LandCruiser RM000000W6Z168X.html | |
| Automatic transmission system (for AC60F, 1GD-FTV) | LandCruiser RM000000W6Z16FX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| SIL indicator light (UP, DOWN) does not come on*10, *11 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html | |
| ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (for 1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Center differential lock indicator light malfunction | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Differential system | LandCruiser RM0000016G601UX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Rear differential lock indicator light malfunction*12 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Differential system | LandCruiser RM0000016G601UX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| 4LO indicator light malfunction | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Differential system | LandCruiser RM0000016G601UX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| 2nd START indicator light malfunction*9 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and start system) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Automatic transmission system (for A750F, 1KD-FTV) | LandCruiser RM000000W6Z162X.html | |
| Automatic transmission system (for AC60F, 1GR-FE) | LandCruiser RM000000W6Z16EX.html | |
| Automatic transmission system (for AC60F, 2TR-FE) | LandCruiser RM000000W6Z168X.html | |
| Automatic transmission system (for AC60F, 1GD-FTV) | LandCruiser RM000000W6Z16FX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| A/T OIL TEMP indicator light malfunction*9, *22 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Automatic transmission system (for A750F, 1KD-FTV) | LandCruiser RM000000W6Z162X.html | |
| Automatic transmission system (for AC60F, 1GR-FE) | LandCruiser RM000000W6Z16EX.html | |
| Automatic transmission system (for AC60F, 2TR-FE) | LandCruiser RM000000W6Z168X.html | |
| Automatic transmission system (for AC60F, 1GD-FTV) | LandCruiser RM000000W6Z16FX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| TAIL indicator light does not come on | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Main body ECU | LandCruiser RM000003WBO05FX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| VSC OFF indicator light does not come on*6 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Proceed to "VSC OFF Indicator Light Come ON" (for Hydraulic Brake Booster) | LandCruiser RM00000451V01RX.html | |
| Proceed to "VSC OFF Indicator Light Come ON" (for Vacuum Brake Booster) | LandCruiser RM000001FQP0L4X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| VSC OFF indicator light does not go off*6 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Proceed to "VSC OFF Indicator Light Remains ON" (for Hydraulic Brake Booster) | LandCruiser RM00000451U01RX.html | |
| Proceed to "VSC OFF Indicator Light Remains ON" (for Vacuum Brake Booster) | LandCruiser RM000001FQO0LMX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| TRC OFF indicator light does not come on*6 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Proceed to "TRC OFF Indicator Light Come ON" (for Hydraulic Brake Booster) | LandCruiser RM000004523021X.html | |
| Proceed to "TRC OFF Indicator Light Come ON" (for Vacuum Brake Booster) | LandCruiser RM000001FQP0L4X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| TRC OFF indicator light does not go off*6 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Proceed to "TRC OFF Indicator Light Remains ON" (for Hydraulic Brake Booster) | LandCruiser RM000004522022X.html | |
| Proceed to "TRC OFF Indicator Light Remains ON" (for Vacuum Brake Booster, 2TR-FE) | LandCruiser RM000001FQO0LMX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Eco driving indicator light malfunction*9 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| SFI system (for 1GR-FE) | LandCruiser RM000000PD915IX.html | |
| SFI system (for 2TR-FE) | LandCruiser RM000000VNB00DX.html | |
| ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html | |
| ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (for 1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| SPEED LIMITER indicator light malfunction*13 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| SFI system (for 1GR-FE) | LandCruiser RM000000PD915IX.html | |
| SFI system (for 2TR-FE) | LandCruiser RM000000VNB00DX.html | |
| ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html | |
| ECD system (for 5L-E) | LandCruiser RM000000VQ900HX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| T-BELT warning indicator light malfunction*14, *22 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| GLOW indicator light malfunction *15 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html | |
| ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (for 1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| GLOW indicator light malfunction*16 | Harness or connector | - |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| ECM | LandCruiser RM000000VW203FX.html | |
| CRAWL indicator light does not come on*17 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000004525011X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| CRAWL indicator light does not go off*17 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSO0C5X.html |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000004524011X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Downhill assist control indicator light does not come on*18 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM00000451X013X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Downhill assist control indicator light does not go off*18 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM00000451W013X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Multi-terrain select indicator light does not come on*17 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM0000045Z8019X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Multi-terrain select indicator light does not go off*17 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM0000045Z7019X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Clearance sonar indicator light malfunction*19, *20 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| TOYOTA Parking Assist-sensor System (w/ Multi-display) | LandCruiser RM000000IQT0AAX.html | |
| TOYOTA Parking Assist-sensor System (w/o Multi-display) | LandCruiser RM000003QOC01CX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| PCS warning light malfunction*21 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Pre-crash safety system | LandCruiser RM0000043JR00AX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Oil pressure warning light does not come on*22 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Engine oil pressure switch assembly (for 1GR-FE) | LandCruiser RM000002ZAX018X.html | |
| Engine oil pressure switch assembly (for 2TR-FE) | LandCruiser RM000003PJP02MX.html | |
| Engine oil pressure switch assembly (for 1KD-FTV) | LandCruiser RM00000463L01KX.html | |
| Engine oil pressure switch assembly (for 5L-E) | LandCruiser RM0000046X2005X.html | |
| Engine oil pressure switch assembly (for 1GD-FTV) | LandCruiser RM000005UCE000X.html | |
| Harness or connector | - | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Oil level warning light does not come on*22, *23, *24 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Engine oil level sensor (1GR-FE) | LandCruiser RM0000039TA00GX.html | |
| Engine oil level sensor (for 1KD-FTV) | LandCruiser RM000003TKG00SX.html | |
| Engine oil level sensor (for 1GD-FTV) | LandCruiser RM000005UCI000X.html | |
| Harness or connector | - | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Oil maintenance warning light does not come on*22, *25 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Kinetic dynamic suspension indicator light malfunction*26 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Kinetic dynamic suspension control System | LandCruiser RM000001N8X02IX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| SEDIMENT/FILTER warning light does not come on*27 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Sediment warning switch (for 1KD-FTV) | LandCruiser RM0000045J4005X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| SEDIMENT warning light does not come on*28 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Sediment switch (for 5L-E) | LandCruiser RM0000046WX005X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Key indicator light does not come on*22, *29 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Entry and start system | LandCruiser RM000000XU60DLX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| BSM indicator light does not come on*30 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Blind spot monitor system | LandCruiser RM000004RRW022X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Headlight beam level control system warning light does not come on*31 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Lighting system | LandCruiser RM000000PKJ0SFX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| LED headlight warning light does not come on*31 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Check indicator/warning light | LandCruiser RM000002Z4Q040X.html | |
| Lighting system | LandCruiser RM000000PKJ0SFX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Tire pressure warning light does not come on*32 | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Proceed to "Tire Pressure Warning Light Circuit" | LandCruiser RM000000XN309TX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Washer level warning light does not come on*22, *33 | Level warning switch assembly | LandCruiser RM000001P2X07KX.html |
| Harness or connector | - | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Diesel particulate filter warning light does not come on*34 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSO0C5X.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSO0BYX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSO0BZX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSO0C0X.html | |
| ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (for 1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Reductant warning indicator does not come on*35 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSO0C5X.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSO0BYX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSO0BZX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSO0C0X.html | |
| ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html |
- *1: w/ Front Fog Light
- *2: w/ Rear Fog Light
- *3: for 1GD-FTV, 2TR-FE
- *4: for 1KD-FTV, 1GR-FE, 5L-E
- *5: w/ Power Steering System
- *6: w/ VSC
- *7: w/ Cruise Control System
- *8: w/ Dynamic Radar Cruise Control System
- *9: for Automatic Transmission
- *10: for Manual Transmission
- *11: for Europe
- *12 w/ Rear Differential Lock
- *13: for Middle East
- *14: for 1KD-FTV, 5L-E
- *15: for 1KD-FTV, 1GD-FTV
- *16: for 5L-E
- *17: w/ CRAWL Control
- *18: w/ Downhill Assist Control
- *19: w/ TOYOTA Parking Assist-sensor System
- *20: for Optitron Meter
- *21: w/ Pre-crash Safety System
- *22: for Analog Meter, Segment Display Type
- *23: for 1KD-FTV, 1GD-FTV
- *24: for 1GR-FE, Europe
- *25: for 1KD-FTV, Europe
- *26: w/ Kinetic Dynamic Suspension System
- *27: w/ SEDIMENT/FILTER Warning Light
- *28: w/ SEDIMENT Warning Light
- *29: w/ Entry and Start System
- *30: w/ Blind Spot Monitor System
- *31: for LED Headlight
- *32: w/ Tire Pressure Monitor System
- *33: w/ Washer Fluid Level Warning System
- *34: w/ DPF
- *35: w/ Urea SCR System
| Symptom | Suspected Area | See page |
| Average vehicle speed display malfunction (Combination meter assembly operates normally) | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Driving range display malfunction (Combination meter assembly operates normally) | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Average fuel consumption display display malfunction (Combination meter assembly operates normally) | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Average fuel consumption after refueling display malfunction (Combination meter assembly operates normally)* | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Current fuel consumption display malfunction (Combination meter assembly operates normally) | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Operating multi-information switch does not change multi-information display* | Multi-information switch (steering pad switch assembly) | LandCruiser RM000003C4V01IX.html |
| Harness or connector | - | |
| LIN communication system | LandCruiser RM000001RSO0BWX.html | |
| Driving support switch control ECU | LandCruiser RM00000466X024X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Eco driving indicator zone display malfunction (for Automatic Transmission) | Combination meter assembly (Eco driving indicator zone display setting) | LandCruiser RM000005C7G003X.html |
| SFI system (for 1GR-FE) | LandCruiser RM000000PD915IX.html | |
| SFI system (for 2TR-FE) | LandCruiser RM000000VNB00DX.html | |
| ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Outside temperature display malfunction | Air conditioning system (for Automatic Air Conditioning System) | LandCruiser RM000002LIM07YX.html |
| Air conditioning system (for Manual Air Conditioning System) | LandCruiser RM000002LIM07ZX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Road surface ice display malfunction (outside temperature display operates normally) (for Optitron Meter) | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Digital speedometer display malfunction (speedometer operates normally)* | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
- *: for Optitron Meter
| Symptom | Suspected Area | See page |
| Multi-information display does not light up (combination meter operates normally) | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Multi-information display malfunction (all warning displays come on, cruise information display does not come on and outside temperature display indicates "F") | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Air suspension indicator display malfunction*1 | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Air suspension system | LandCruiser RM000001N8X02HX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Steering angle display malfunction | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html | |
| Spiral cable sub-assembly | LandCruiser RM000002O8X02DX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Door open message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Proceed to "Door Courtesy Switch Circuit" | LandCruiser RM0000011T30D0X.html |
| Proceed to "Back Door Courtesy Switch Circuit" | LandCruiser RM000002WL802EX.html | |
| Main body ECU | LandCruiser RM000003WBO05FX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "MOON ROOF OPENED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*2 | Sliding roof control system | LandCruiser RM000002B5402FX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "ENGINE OIL PRESSURE LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Engine oil pressure switch assembly (for 1GR-FE) | LandCruiser RM0000046WQ00TX.html |
| Engine oil pressure switch assembly (for 2TR-FE) | LandCruiser RM000003PJN02LX.html | |
| Engine oil pressure switch assembly (for 1KD-FTV) | LandCruiser RM0000047VU016X.html | |
| Engine oil pressure switch assembly (for 1GD-FTV) | LandCruiser RM000005UCE000X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "RELEASE PARKING BRAKE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Brake warning light operate normally) | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| "HIGH TRANSMISSION FLUID TEMPERATURE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3 | Automatic transmission system (for A750F, 1KD-FTV) | LandCruiser RM000000W6Z162X.html |
| Automatic transmission system (for AC60F, 1GR-FE) | LandCruiser RM000000W6Z16EX.html | |
| Automatic transmission system (for AC60F, 2TR-FE) | LandCruiser RM000000W6Z168X.html | |
| Automatic transmission system (for AC60F, 1GD-FTV) | LandCruiser RM000000W6Z16FX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECK TRANSMISSION SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3 | Automatic transmission system (for A750F, 1KD-FTV) | LandCruiser RM000000W6Z162X.html |
| Automatic transmission system (for AC60F, 1GR-FE) | LandCruiser RM000000W6Z16EX.html | |
| Automatic transmission system (for AC60F, 2TR-FE) | LandCruiser RM000000W6Z168X.html | |
| Automatic transmission system (for AC60F, 1GD-FTV) | LandCruiser RM000000W6Z16FX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "SHIFT TO P POSITION" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3, *4 | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "KEY NOT DETECTED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "KEY BATTERY LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECK CLUTCH SWITCH" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*5 | Clutch pedal switch | LandCruiser RM0000032S300DX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECK STEERING LOCK SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Steering lock system | LandCruiser RM000001T1306UX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "STEERING LOCK ACTIVE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Steering lock system | LandCruiser RM000001T1306UX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "KEY DETECTED IN VEHICLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AUTO POWER OFF TO CONSERVE BATTERY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DEPRESS BRAKE PEDAL, TOUCH ENGINE SWITCH WITH KEY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3, *4 | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DEPRESS CLUTCH PEDAL, TOUCH ENGINE SWITCH WITH KEY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4, *5 | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DEPRESS BRAKE PEDAL AND PUSH ENGINE SWITCH TO START" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3, *4 | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DEPRESS CLUTCH PEDAL AND PUSH ENGINE SWITCH TO START" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4, *5 | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "SHIFT TO P POSITION TO START" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3 | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "TURN POWER OFF" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "SHIFT TO P POSITION AND PUSH ENGINE SWITCH TO TURN POWER OFF" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Dynamic radar cruise control system message is displayed when it should not be, not displayed when it should be, or not displayed correctly*6 | Dynamic radar cruise control system | LandCruiser RM0000044GS00NX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "ADJUSTING FRONT RADAR BEAM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*6 | Dynamic radar cruise control system | LandCruiser RM0000044GS00NX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECKING CRUISE CONTROL C/D" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*6 | Dynamic radar cruise control system | LandCruiser RM0000044GS00NX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECKING CRUISE CONTROL BRAKE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*6 | Dynamic radar cruise control system | LandCruiser RM0000044GS00NX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CLEAN RADAR SENSOR" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*6 | Dynamic radar cruise control system | LandCruiser RM0000044GS00NX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CRUISE CONTROL NOT AVAILABLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*6 | Dynamic radar cruise control system | LandCruiser RM0000044GS00NX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECK CRUISE CONTROL SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*7 | Cruise control system | LandCruiser RM0000044AP01XX.html |
| Dynamic radar cruise control system (w/ Dynamic Radar Cruise Control System) | LandCruiser RM0000044GS00NX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Pre-crash safety system message is displayed when it should not be, not displayed when it should be, or not displayed correctly*8 | Pre-crash safety system | LandCruiser RM0000043JS00PX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "BRAKE !" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*8 | Pre-crash safety system | LandCruiser RM0000043JS00PX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECK PCS SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*8 | Pre-crash safety system | LandCruiser RM0000043JS00PX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "PCS TEMPORARILY NOT AVAILABLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*8 | Pre-crash safety system | LandCruiser RM0000043JS00PX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECK AIR SUSPENSION SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*1 | Suspension control system | LandCruiser RM000001N8X02HX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AIR SUSPENSION TEST MODE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*1 | Air suspension system | LandCruiser RM000001N8X02HX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| TOYOTA parking assist-sensor system message is displayed when it should not be, not displayed when it should be, or not displayed correctly*9 | TOYOTA Parking Assist-sensor System (w/ Multi-display) | LandCruiser RM000000IQT0AAX.html |
| TOYOTA Parking Assist-sensor System (w/o Multi-display) | LandCruiser RM000003QOC01CX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECK SONAR SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*9 | TOYOTA Parking Assist-sensor System (w/ Multi-display) | LandCruiser RM000000IQT0AAX.html |
| TOYOTA Parking Assist-sensor System (w/o Multi-display) | LandCruiser RM000003QOC01CX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CLEAN SONAR" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*9 | TOYOTA Parking Assist-sensor System (w/ Multi-display) | LandCruiser RM000000IQT0AAX.html |
| TOYOTA Parking Assist-sensor System (w/o Multi-display) | LandCruiser RM000003QOC01CX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "BSM NOT AVAILABLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*10 | Blind spot monitor system | LandCruiser RM000004RRW022X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECK BSM SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*10 | Blind spot monitor system | LandCruiser RM000004RRW022X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "ENGINE OIL LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12, *13 | Engine oil level sensor (for 1GR-FE) | LandCruiser RM0000039T900HX.html |
| Engine oil level sensor (for 1KD-FTV) | LandCruiser RM000003TKG00SX.html | |
| Engine oil level sensor (for 1GD-FTV) | LandCruiser RM000005UCI000X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "FUEL FILTER MAINTENANCE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12 | Fuel filter assembly (sedimenter switch) (for 1KD-FTV) | LandCruiser RM0000045HW007X.html |
| Fuel filter assembly (sedimenter switch) (for 1GD-FTV) | LandCruiser RM0000045HW008X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DRAIN WATER FROM FUEL FILTER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12 | Level warning switch (for 1KD-FTV) | LandCruiser RM0000045J4005X.html |
| Level warning switch (for 1GD-FTV) | LandCruiser RM0000045J4006X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CRAWL HAS BEEN DEACTIVATED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CRAWL NOT AVAILABLE SELECT L4 AND SHIFT TO D OR R POSITION" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CRAWL NOT AVAILABLE CHECK SYSTEM OPERATION CONDITIONS" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECK FUEL SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12 | Fuel system (for 1KD-FTV) | LandCruiser RM0000028RU05KX.html |
| Fuel system (for 1GD-FTV) | LandCruiser RM0000028RU05SX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "T-BELT MAINTENANCE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11 | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| T-BELT maintenance reset message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11 | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| T-BELT maintenance reset complete message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11 | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| T-BELT maintenance mileage message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11 | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| "OIL MAINTENANCE REQUIRED SOON" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12, *15 | Fuel system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html |
| ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (for 1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "OIL MAINTENANCE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12, *15 | ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html |
| ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (for 1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Oil maintenance required reset message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12, *15 | ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html |
| ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (for 1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Oil maintenance reset complete message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12, *15 | ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html |
| ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (for 1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Oil maintenance reset unfinished message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12, *15 | ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html |
| ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (for 1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Multi-terrain select message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "SHIFT TO L4" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "STOP THE VEHICLE AND SHIFT THE AUTOMATIC TRANSMISSION TO N" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "MULTI-TERRAIN SELECT NOT AVAILABLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "OPERATION NOT POSSIBLE WHEN MULTI-TERRAIN SELECT ACTIVATED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "OPERATION NOT POSSIBLE WHEN CRAWL CONTROL ACTIVATED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "MULTI-TERRAIN SELECT HAS BEEN CANCELLED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECK HEADLIGHT SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*16 | Lighting system | LandCruiser RM000000PKJ0SFX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "LOW WASHER FLUID" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*17 | Level warning switch assembly | LandCruiser RM000001P2X07KX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Clinometer display malfunction | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Yaw rate sensor | LandCruiser RM000000SS507KX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Traction operation display malfunction | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html | |
| Vehicle stability control system (for Vacuum Brake Booster) | LandCruiser RM000000XHK0M7X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Center differential lock display malfunction | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Transfer system | LandCruiser RM00000112C02HX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Rear differential lock display malfunction | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Transfer system | LandCruiser RM00000112C02HX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Turn-by-turn navigation display malfunction*18 | Navigation system (for Radio and Display Type) | LandCruiser RM0000011BN0TIX.html |
| Navigation system (for Navigation Receiver Type) | LandCruiser RM0000011BN0THX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Compass display malfunction*18 | Navigation system (for Radio and Display Type) | LandCruiser RM0000011BN0TIX.html |
| Navigation system (for Navigation Receiver Type) | LandCruiser RM0000011BN0THX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** km SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** MILES SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** km SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** MILES SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue LEVEL LOW NO START IN **** km! FILL UP AdBlue SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue LEVEL LOW NO START IN **** MILES! FILL UP AdBlue SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue EMPTY UNABLE TO RESTART ENGINE FILL UP AdBlue SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "EMISSIONS TOO HIGH CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "EMISSIONS TOO HIGH NO START IN **** km! CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "EMISSIONS TOO HIGH NO START IN **** MILES! CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "EMISSIONS TOO HIGH UNABLE TO RESTART ENGINE CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DPF FULL SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*20 | ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html |
| ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DPF FULL VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*20 | ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html |
| ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (1GD-FTV, w/o Urea SCR System) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "MANUAL REGENERATION IN PROCESS KEEP FLAMMABLES AWAY FROM VEHICLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*20 | ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html |
| ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (1GD-FTV, w/o Urea SCR System) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DPF REGENERATION IN PROCESS" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*20 | ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html |
| ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DPF MANUAL REGENERATION AVAILABLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*20 | ECD system (for 1KD-FTV) | LandCruiser RM0000012WB0A9X.html |
| ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DPF FULL MANUAL REGENERATION REQUIRED SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*20 | ECD system (for 1KD-FTV, w/ DPF) | LandCruiser RM0000012WB0A9X.html |
| ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html | |
| ECD system (1GD-FTV) | LandCruiser RM0000012WB0ADX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html |
- *1: w/ Air Suspension System
- *2: w/ Sliding Roof System
- *3: for Automatic Transmission
- *4: w/ Entry and Start System
- *5: for Manual Transmission
- *6: w/ Dynamic Radar Cruise Control System
- *7: w/ Cruise Control System
- *8: w/ Pre-crash Safety System
- *9: w/ TOYOTA Parking Assist-sensor System
- *10: w/ Blind Spot Monitor System
- *11: for 1KD-FTV
- *12: for 1GD-FTV
- *13: for 1GR-FE, Europe
- *14: w/ CRAWL Control
- *15: for Europe
- *16: for LED Headlight
- *17: w/ Washer Fluid Level Warning System
- *18: w/ Navigation System
- *19: w/ Urea SCR System
- *20: w/ DPF
| Symptom | Suspected Area | See page |
| Multi-information display does not light up (combination meter operates normally) | Check indicator/warning light | LandCruiser RM000002Z4Q040X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Multi-information display malfunction (all warning displays come on, cruise information display does not come on and outside temperature display indicates "F") | CAN communication system (for LHD with Entry and Start System) | LandCruiser RM000001RSN05QX.html |
| CAN communication system (for LHD without Entry and Start System) | LandCruiser RM000001RSN05RX.html | |
| CAN communication system (for RHD with Entry and Start System) | LandCruiser RM000001RSN05SX.html | |
| CAN communication system (for RHD without Entry and Start System) | LandCruiser RM000001RSN05TX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "ENGINE OIL PRESSURE LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Engine oil pressure switch assembly (for 1GD-FTV) | LandCruiser RM000005UCE000X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "RELEASE PARKING BRAKE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Brake warning light operate normally) | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| "HIGH TRANSMISSION FLUID TEMPERATURE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Automatic Transmission) | Automatic transmission system (for AC60F, 1GD-FTV) | LandCruiser RM000000W6Z16FX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECK TRANSMISSION SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Automatic Transmission) | Automatic transmission system (for AC60F, 1GD-FTV) | LandCruiser RM000000W6Z16FX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "KEY NOT DETECTED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DEPRESS BRAKE PEDAL, TOUCH ENGINE SWITCH WITH KEY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Automatic Transmission) | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DEPRESS CLUTCH PEDAL, TOUCH ENGINE SWITCH WITH KEY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Manual Transmission) | Entry and start system (for Entry and Start System) | LandCruiser RM000000XU70G9X.html |
| Entry and start system (for Start Function) | LandCruiser RM000000YEF0MNX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "ENGINE OIL LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Engine oil level sensor (for 1GD-FTV) | LandCruiser RM000005UCI000X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "FUEL FILTER MAINTENANCE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Fuel filter assembly (sedimenter switch) (for 1GD-FTV) | LandCruiser RM0000045HW008X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DRAIN WATER FROM FUEL FILTER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Level warning switch (for 1GD-FTV) | LandCruiser RM0000045J4006X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "OIL MAINTENANCE REQUIRED SOON" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "OIL MAINTENANCE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Oil maintenance required reset message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Oil maintenance reset complete message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Oil maintenance reset unfinished message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "CHECK HEADLIGHT SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for LED Headlight) | Lighting system | LandCruiser RM000000PKJ0SFX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "LOW WASHER FLUID" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Washer Fluid Level Warning System) | Level warning switch assembly | LandCruiser RM000001P2X07KX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** km SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** MILES SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** km SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** MILES SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue LEVEL LOW NO START IN **** km! FILL UP AdBlue SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue LEVEL LOW NO START IN **** MILES! FILL UP AdBlue SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "AdBlue EMPTY UNABLE TO RESTART ENGINE FILL UP AdBlue SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "EMISSIONS TOO HIGH CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "EMISSIONS TOO HIGH NO START IN **** km! CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "EMISSIONS TOO HIGH NO START IN **** MILES! CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "EMISSIONS TOO HIGH UNABLE TO RESTART ENGINE CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DPF FULL SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DPF FULL VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "MANUAL REGENERATION IN PROCESS KEEP FLAMMABLES AWAY FROM VEHICLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DPF REGENERATION IN PROCESS" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DPF MANUAL REGENERATION AVAILABLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| "DPF FULL MANUAL REGENERATION REQUIRED SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | LandCruiser RM0000012WB0ACX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Symptom | Suspected Area | See page |
| All buzzers do not operate normally | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Seat belt warning buzzer does not operate (Front seat belt warning light operates normally) | Check customize setting | LandCruiser RM000005C7G003X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Shift down reject buzzer does not operate*1 | Automatic transmission system (for 1GR-FE) | LandCruiser RM000000W6Z16EX.html |
| Automatic transmission system (for 2TR-FE) | LandCruiser RM000000W6Z168X.html | |
| Automatic transmission system (for 1GD-FTV) | LandCruiser RM000000W6Z16FX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Key reminder buzzer does not operate*2 | Key reminder warning system | LandCruiser RM000002YKM02XX.html |
| Sliding roof open warning buzzer does not operate*3 | Sliding roof control system | LandCruiser RM000002B5402FX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Driving with parking brake unreleased warning buzzer does not operate (Speedometer and brake warning light are operate normally) | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Driving with any door opened warning buzzer does not operate (Speedometer and open door warning light operate normally) | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Multi-information display warning buzzer does not operate | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Entry and start system warning buzzer does not operate*4 | Entry and start system | LandCruiser RM000000YEF0MNX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Engine immobiliser certification buzzer does not operate | Engine immobiliser system (w/ Entry and Start System) | LandCruiser RM000000QY40G3X.html |
| Engine immobiliser system (w/o Entry and Start System) | LandCruiser RM000001GUQ05EX.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Light reminder buzzer does not operate*5 | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Dynamic radar cruise control low speed cancel buzzer does not operate*6 | Dynamic radar cruise control system | LandCruiser RM0000044GR00FX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Dynamic radar cruise control warning buzzer does not operate*6 | Dynamic radar cruise control system | LandCruiser RM0000044GR00FX.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| 4WD buzzer does not operate | Transfer system | - |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Shift position R buzzer does not operate*7 | Back-up light switch | LandCruiser RM0000047AP005X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| Speed limit exceeded buzzer does not operate*8 | Speed signal circuit | LandCruiser RM000002UD70E2X.html |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html | |
| SEDIMENT buzzer does not operate (SEDIMENT warning light operate normally)*9 | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| Master warning buzzer does not operate (Master warning light operate normally)*10 | Combination meter assembly | LandCruiser RM000003QKY01CX.html |
| VSC buzzer does not operate*11 | Vehicle stability control system (for Hydraulic Brake Booster) | LandCruiser RM000001DWP03DX.html |
| Vehicle stability control system (for Vacuum Brake Booster) | LandCruiser RM000000XHK0M7X.html | |
| Combination meter assembly | LandCruiser RM000003QKY01CX.html |
- *1: for Automatic Transmission (AC60F)
- *2: w/o Entry and Start System
- *3: w/ Sliding Roof System
- *4: w/ Entry and Start System
- *5: w/ Light Reminder System
- *6: w/ Dynamic Radar Cruise Control System
- *7: for Manual Transmission (RA61F)
- *8: for Middle East
- *9: w/ SEDIMENT Warning Light
- *10: except Analog Meter, Segment Display Type
- *11: w/ VSC
| Symptom | Suspected Area | See page |
| Other systems that use speed signal do not operate normally | Speed signal circuit | LandCruiser RM000002UD70E2X.html |
| Customizable parameters cannot be changed (customizable parameters can be changed by using intelligent tester) | Combination meter assembly | LandCruiser RM000003QKY01CX.html |