Turn Signal Flasher Assembly On-Vehicle Inspection


  1. CHECK TURN SIGNAL FLASHER ASSEMBLY

Turn Signal Flasher Assembly -- On-Vehicle Inspection



1. CHECK TURN SIGNAL FLASHER ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Lighting (Ext).Lighting System.Turn Signal Flasher Assembly On-Vehicle Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    5 (E) - Body ground
    		Always
    		Below 1 Ω

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    		Condition
    		Specified Condition
    2 (LR) - 7 (E)
    		Hazard warning switch off
    		Below 1 V
    Hazard warning switch on
    		Alternating between 11 to 14 V and below 1 V
    (60 to 120 times per minute)
    3 (LL) - 7 (E)
    		Hazard warning switch off
    		Below 1 V
    Hazard warning switch on
    		Alternating between 11 to 14 V and below 1 V
    (60 to 120 times per minute)
    4 (B) - 7 (E)
    		Always
    		11 to 14 V
    5 (EL) - 7 (E)
    		Ignition switch ON
    Headlight dimmer switch (turn left) off
    		9 V or higher
    Ignition switch ON
    Headlight dimmer switch (turn left) on
    		Below 1 V
    6 (ER) - 7 (E)
    		Ignition switch ON
    Headlight dimmer switch (turn right) off
    		9 V or higher
    Ignition switch ON
    Headlight dimmer switch (turn right) on
    		Below 1 V
    8 (HAZ) - 7 (E)
    		Hazard warning switch off
    		9 V or higher
    Hazard warning switch on
    		Below 1 V
    If the result is not as specified, there may be a malfunction in the turn signal flasher.
    Text in Illustration
    *a
    		Front view of wire harness connector
    (to Turn Signal Flasher Assembly)