Washer Level Warning Switch Inspection


  1. INSPECT LEVEL WARNING SWITCH ASSEMBLY

Washer Level Warning Switch -- Inspection



1. INSPECT LEVEL WARNING SWITCH ASSEMBLY
HINT:
The following check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.

  1. Fill the windshield washer jar assembly with washer fluid.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Wiper Washer.Wiper And Washer System.Washer Level Warning Switch Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 (S) - 2 (E)
    		Fluid volume is more than 750 cc (45.7 cu.in.)
    		10 kΩ or higher
    1 (S) - 2 (E)
    		Fluid volume is less than 550 cc (33.5 cu.in.)
    		Below 1 Ω
    HINT:
    When the fluid volume is between 550 and 750 cc (33.5 and 45.7 cu.in.), the level warning switch assembly may be on or off.
    If the result is not as specified, replace the level warning switch assembly.
    Text in Illustration
    *a
    		Component without harness connected
    (Level Warning Switch Assembly)