Meter / Gauge System Operation Check

  1. CHECK INDICATOR/WARNING LIGHT

  1. CHECK SPEEDOMETER

  1. CHECK TACHOMETER

  1. CHECK METER/GAUGE

  1. CHECK WARNING/INDICATOR LIGHT

  1. CHECK MULTI-INFORMATION DISPLAY (for Analog Meter, Segment Display Type)

  1. CHECK MULTI-INFORMATION DISPLAY (except Analog Meter, Segment Display Type)

Meter / Gauge System -- Operation Check



CHECK INDICATOR/WARNING LIGHT

  1. Check the following indicators and warning lights.

    Indicator/Warning Light
    		Switch Condition
    		Specified Condition
    Brake warning light
    		Ignition switch off → ON
    		Comes on for 3 seconds
    ABS warning light
    SLIP indicator light*1
    TRC OFF indicator light*1
    VSC OFF indicator light*1
    CRAWL indicator light*3
    Downhill assist control indicator light*4
    KDSS indicator light*5
    Eco driving indicator Light*6
    Oil maintenance warning light*2, *7
    OIL level indicator light*8, *9
    T-BELT indicator light*2, *10
    SEDIMENTER/FUEL FILTER indicator light*11
    SEDIMENTER indicator light*12
    SPEED LIMIT indicator light*13
    PCS indicator light*14
    PPS warning light*1, *15
    Master warning light*16
    BSM indicator light*17
    Headlight beam level control system warning light*18
    LED headlight warning light*18
    Tire pressure warning light*19
    Diesel particulate filter warning light*22
    SRS warning light
    		Ignition switch off → ON
    		Comes on for 6 seconds
    CHARGE warning light
    		Ignition switch off → ON
    1. Illuminates when ignition switch turned to ON
    2. Turns off when engine started
    OIL PRESSURE warning light*1
    A/T OIL TEMP warning light*2, *6
    MIL
    SIL indicator light*20, *21

    1. *1: w/ VSC
    2. *2: for Analog Meter, Segment Display Type
    3. *3: w/ CRAWL Control
    4. *4: w/ Downhill Assist Control
    5. *5: w/ Kinetic Dynamic Suspension System
    6. *6: for Automatic Transmission
    7. *7: for 1KD-FTV, Europe
    8. *8: for 1KD-FTV, 1GD-FTV
    9. *9: for 1GR-FE, Europe
    10. *10: for 1KD-FTV, 5L-E
    11. *11: w/ SEDIMENT/FILTER Warning Light
    12. *12: w/ SEDIMENT Warning Light
    13. *13: for Middle East
    14. *14: w/ Pre-crash Safety System
    15. *15: w/ Power Steering System
    16. *16: except Analog Meter, Segment Display Type
    17. *17: w/ Blind Spot Monitor System
    18. *18: for LED Headlight
    19. *19: w/ Tire Pressure Monitor System
    20. *20: for Manual Transmission
    21. *21: for Europe
    22. *22: w/ DPF

CHECK SPEEDOMETER

  1. Connect the GTS to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the GTS on.

  4. Enter the following menus: Powertrain / Engine and ECT / Data List.

    Reference:
    for mph
    Standard Indication (mph)
    		Acceptable Range (mph)
    20
    		21 to 23.5
    40
    		42 to 44.5
    60
    		62.5 to 66
    80
    		83.1 to 87.1
    100
    		103.9 to 108.4
    for km/h (except Australia)
    Standard Indication (km/h)
    		Acceptable Range (km/h)
    20
    		21 to 25
    40
    		41.7 to 46.2
    60
    		62.7 to 67.2
    80
    		83.4 to 88.4
    100
    		104.3 to 109.3
    120
    		125.1 to 130.6
    140
    		145.8 to 151.8
    160
    		166.2 to 173.2
    180
    		186.9 to 194.5
    for km/h (for Australia)
    Standard Indication (km/h)
    		Acceptable Range (km/h)
    20
    		20.4 to 24.4
    40
    		40.8 to 45.3
    60
    		61.2 to 65.7
    80
    		81.6 to 86.6
    100
    		102 to 106
    120
    		122.4 to 127.4
    140
    		142.8 to 147.8
    160
    		163.2 to 168.2
    180
    		183.6 to 188.6
    If the result is not as specified, the speedometer may have a malfunction.
    NOTICE:
    Do not use worn, underinflated or overinflated tires as the speedometer reading will be inaccurate.

  5. Check the deflection width of the speedometer indicator.

    Reference:
    Within 0.3°

CHECK TACHOMETER

  1. Connect a tune-up tachometer and start the engine.

  2. Compare the test results with the tachometer indicator.

    DC 13.5 V at 25°C (77°F):
    Standard Indication (rpm)
    		Acceptable Range Data in ( ) is for Reference (rpm)
    700
    		630 to 770
    1000
    		(900 to 1100)
    2000
    		(1850 to 2150)
    3000
    		2800 to 3200
    4000
    		(3800 to 4200)
    5000
    		4800 to 5200
    6000*
    		(5750 to 6250)
    1. *: for Gasoline Engine
    If the result is not as specified, the tachometer may have a malfunction.

CHECK METER/GAUGE

  1. Connect the GTS to the DLC3.

  2. Perform the Active Test (LandCruiser RM0000012G70JTX.html).

    OK:
    Each meter/gauge needle indication is normal.

CHECK WARNING/INDICATOR LIGHT

  1. Connect the GTS to the DLC3.

  2. Perform the Active Test (LandCruiser RM0000012G70JTX.html).

    OK:
    Each warning/indicator light can be turned on and off using the GTS.

CHECK MULTI-INFORMATION DISPLAY (for Analog Meter, Segment Display Type)

  1. Connect the GTS to the DLC3.

  2. Perform the Active Test (LandCruiser RM0000012G70JTX.html).

    OK:
    All segments in the multi-information display can be turned on and off using the GTS.

CHECK MULTI-INFORMATION DISPLAY (except Analog Meter, Segment Display Type)

  1. Connect the GTS to the DLC3.

  2. Perform the Active Test (LandCruiser RM0000012G70JTX.html).

    OK:
    All dots in the multi-information display can be turned on and off using the GTS.