Engine Switch - Installation
Attach the 2 claws to install the switch.
Terminal No. | Specified condition |
1 - 2 | 10 kΩ or higher |
Below 1 Ω (Apply battery voltage between terminals 3 and 4) |
If the resistance is not as specified, replace the glow plug relay assembly.
Tester Connection | Specified Condition |
3 - 5 | 10 kΩ or higher |
Below 1 Ω (Apply battery voltage between terminals 1 and 2) |
If the result is not as specified, replace the starter cut relay.
Terminal No. | Specified condition |
3 - 5 | 10 kΩ or higher |
Below 1 Ω (Apply battery voltage between terminals 1 and 2) |
If the resistance is not as specified, replace the starter relay assembly.