Lexus IS250 IS220d GSE20 ALE20 2AD-FHV STARTING
STARTER - INSTALLATION
| 1. INSTALL STARTER ASSEMBLY |
Install the starter assembly with the bolt and nut.
- Torque:
- 64 N*m{ 650 kgf*cm, 47 ft.*lbf}
Connect the wire harness to terminal 30 and install the nut, and then attach the terminal cap.
- Torque:
- 9.8 N*m{ 100 kgf*cm, 87 in.*lbf}
Connect the terminal 50 connector to the starter assembly.
Install the wire harness clamp bracket with the bolt.
- Torque:
- 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
Connect the 2 wire harness clamps.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm, 48 in.*lbf}
| 3. PERFORM INITIALIZATION |
Perform initialization procedure .
- HINT:
- Some vehicle systems require initialization after reconnecting the negative battery cable.
LEXUS IS250, IS220d / GSE20 ALE20