Vehicle Stability Control System (For Vacuum Brake Booster) Vsc Buzzer Circuit
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK CAN COMMUNICATION LINE
READ VALUE USING INTELLIGENT TESTER (BUZZER)
INSPECT COMBINATION METER ASSEMBLY
VEHICLE STABILITY CONTROL SYSTEM (for Vacuum Brake Booster) - VSC Buzzer Circuit |
DESCRIPTION
The skid control ECU (brake actuator assembly) is connected to the combination meter assembly via CAN communication.The combination meter assembly has a built-in buzzer.
WIRING DIAGRAM
INSPECTION PROCEDURE
- NOTICE:
- When replacing the skid control ECU (brake actuator assembly), perform calibration (LandCruiser RM000000XHR0BKX.html).
1.CHECK CAN COMMUNICATION LINE |
Check if CAN communication system DTCs are output (for LHD without Entry and Start System: LandCruiser RM000000WIB0EDX.html, for LHD with Entry and Start System: LandCruiser RM000000WIB0ECX.html).
ResultResult
| Proceed to
|
DTC not output
| A
|
DTC output
| for LHD without Entry and Start System
| B
|
DTC output
| for LHD with Entry and Start System
| C
|
2.READ VALUE USING INTELLIGENT TESTER (BUZZER) |
Turn the engine switch off.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Chassis / ABS/VSC/TRAC / Data List.
ABS/VSC/TRACTester Display
| Measurement Item/Range
| Normal Condition
| Diagnostic Note
|
Buzzer
| Buzzer/ ON or OFF
| ON: Buzzer on OFF: Buzzer off
| The combination meter has a built-in buzzer.
|
When performing the Buzzer Active Test, check Buzzer in the Data List (LandCruiser RM000000XHW0GKX.html).
ABS/VSC/TRACTester Display
| Test Part
| Control Range
| Diagnostic Note
|
Buzzer
| Buzzer
| Buzzer ON/OFF
| The buzzer can be heard.
|
ResultResult
| Proceed to
|
Data List Display
| Data List Display when Performing Active Test ON/OFF Operation
|
ON
| Changes between ON and OFF
| A
|
Does not change between ON and OFF
| B
|
OFF
| Changes between ON and OFF
| A
|
Does not change between ON and OFF
| B
|
3.INSPECT COMBINATION METER ASSEMBLY |
Inspect the combination meter (LandCruiser RM000002Z4L055X.html).