INSTALL REAR CRANKSHAFT OIL SEAL. INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY. REMOVE REAR CRANKSHAFT OIL SEAL.

3UR-FE Rear crankshaft oil seal - Components

NSTALL FRONT CRANKSHAFT OIL SEAL. INSTALL CRANKSHAFT TIMING GEAR KEY. INSTALL CRANKSHAFT PULLEY. INSTALL OIL FILTER BRACKET. INSTALL NO. 1 OIL COOLER BRACKET. CONNECT NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY. CONNECT COOLER COMPRESSOR ASSEMBLY.

REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH Remove the 3 bolts and screw. Turn the clip indicated by the arrow in the illustration to remove the fender splash shield.

Front crankshaft oil seal - Components

INSPECT CYLINDER HEAD SET BOLT. INSPECT CYLINDER HEAD SUB-ASSEMBLY. INSTALL CYLINDER HEAD SUB-ASSEMBLY RH. INSTALL CYLINDER HEAD SUB-ASSEMBLY LH. INSTALL VALVE STEM CAP. INSTALL VALVE LASH ADJUSTER ASSEMBLY. INSTALL NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY. INSTALL CAMSHAFT. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY.

REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY. REMOVE CAMSHAFT. REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY. REMOVE VALVE LASH ADJUSTER ASSEMBLY. REMOVE VALVE STEM CAP. REMOVE CYLINDER HEAD SUB-ASSEMBLY LH. REMOVE CYLINDER HEAD SUB-ASSEMBLY RH.

Cylinder head gasket - Components

1. DISCHARGE FUEL SYSTEM PRESSURE 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected . 3. REMOVE UPPER RADIATOR SUPPORT SEAL Remove the 7 clips and radiator support seal.