Body Electrical. Camry. Acv40 Gsv40
Lighting. Camry. Acv40 Gsv40
Lighting System -- Problem Symptoms Table |
| Symptom | Suspected Area | See page |
| One side LO-beam headlight does not illuminate. | 1. H-LP RL fuse or H-LP LL fuse | - |
| 2. Bulb | - | |
| 3. Harness or connector | - | |
| 4. Light control ECU (for HID headlight) | - | |
| 5. Power distributor (Engine room J/B) | - | |
| Both left and right LO-beam headlights do not illuminate. | 1. H-LP RL fuse and H-LP LL fuse | - |
| 2. Bulb | - | |
| 3. Light control switch circuit | CAMRY_ACV40 RM0000011M3007X.html | |
| 4. Headlight relay circuit | CAMRY_ACV40 RM000000ZBM004X.html | |
| 5. Main body ECU (Instrument panel J/B) | - | |
| One side HI-beam headlight does not illuminate. | 1. H-LP RH fuse or H-LP LH fuse | - |
| 2. Bulb | - | |
| 3. Harness or connector | - | |
| 4. Power distributor (Engine room J/B) | - | |
| Both left and right HI-beam headlights do not illuminate. | 1. H-LP RH fuse and H-LP LH fuse | - |
| 2. Bulb | - | |
| 3. Light control switch circuit | CAMRY_ACV40 RM0000011M3007X.html | |
| 4. Headlight (HI-BEAM) circuit | CAMRY_ACV40 RM000001A7L003X.html | |
| 5. Main body ECU (Instrument panel J/B) | - | |
| "Flash" headlight does not illuminate. | 1. Light control switch circuit | CAMRY_ACV40 RM0000011M3007X.html |
| 2. Main body ECU (Instrument panel J/B) | - | |
| LO-beam headlights or HI-beam headlights do not go off. | 1. Headlight dimmer switch assembly | CAMRY_ACV40 RM0000014E3006X.html |
| 2. Power distributor (Engine room J/B) | - | |
| 3. Harness or connector | - | |
| 4. Main body ECU (Instrument panel J/B) | - |
| Symptom | Suspected Area | See page |
| Front parking light does not illuminate. | 1. Bulb | - |
| 2. Harness or connector | - | |
| Rear taillight does not illuminate. | 1. Bulb | - |
| 2. Harness or connector | - | |
| License plate light does not illuminate. | 1. Bulb | - |
| 2. Harness or connector | - | |
| Taillight system does not operate (Taillight, parking lights, and license plate lights do not illuminate). | 1. TAIL fuse | - |
| 2. Taillight relay | CAMRY_ACV40 RM000001Y6R004X.html | |
| 3. Light control switch circuit | CAMRY_ACV40 RM0000011M3007X.html | |
| 4. Taillight relay circuit | CAMRY_ACV40 RM000001MEH003X.html | |
| 5. Main body ECU (Instrument panel J/B) | - |
| Symptom | Suspected Area | See page |
| Stop light system does not operate. | 1. Bulb | - |
| 2. Stop fuse | - | |
| 3. Stop light switch | CAMRY_ACV40 RM0000014D9006X.html | |
| 4. Harness or connector | - | |
| One side stop light does not illuminate. | 1. Bulb | - |
| 2. Harness or connector | - | |
| Hi-mounted stop light does not illuminate. | 1. Bulb | - |
| 2. Harness or connector | - |
| Symptom | Suspected Area | See page |
| One side fog light does not illuminate. | 1. Bulb | - |
| 2. Harness or connector | - | |
| Both left and right fog lights do not illuminate (Taillight system is normal). | 1. FR FOG fuse | - |
| 2. FR FOG relay | CAMRY_ACV40 RM000001Y6R003X_01_0001.html | |
| 3. Light control switch circuit | CAMRY_ACV40 RM0000011M3007X.html | |
| 4. Front fog light circuit | CAMRY_ACV40 RM0000011T400AX.html | |
| 5. Main body ECU (Instrument panel J/B) | - |
| Symptom | Suspected Area | See page |
| One side fog light does not illuminate. | 1. Bulb | - |
| 2. Harness or connector | - | |
| Both left and right fog lights do not illuminate. (Taillight system is normal) | 1. RR FOG fuse | - |
| 2. RR FOG relay | CAMRY_ACV40 RM000001Y6R003X_01_0002.html | |
| 3. Light control switch circuit | CAMRY_ACV40 RM0000011M3007X.html | |
| 4. Rear fog light circuit | CAMRY_ACV40 RM000001A64003X.html | |
| 5. Main body ECU (Instrument panel J/B) | - |
| Symptom | Suspected Area | See page |
| Hazard warning lights do not operate (Turn signal lights are normal). | 1. HAZ fuse | - |
| 2. Hazard warning signal switch | CAMRY_ACV40 RM00000197T007X.html | |
| 3. Clock assembly | - | |
| 4. Turn signal flasher assembly | CAMRY_ACV40 RM000001ZTV002X.html | |
| 5. Harness or connector | - | |
| Turn signal lights do not operate (Hazard warning lights are normal). | 1. GAUGE No. 1 fuse | - |
| 2. Headlight dimmer switch assembly (Turn signal switch) | CAMRY_ACV40 RM0000014E3006X.html | |
| 3. Turn signal flasher assembly | CAMRY_ACV40 RM000001ZTV002X.html | |
| 4. Harness or connector | - | |
| Hazard warning lights and turn signal lights do not operate. | 1. HAZ fuse and GAUGE No. 1 fuse | - |
| 2. Bulb | - | |
| 3. Turn signal flasher assembly | CAMRY_ACV40 RM000001ZTV002X.html | |
| 4. Hazard warning signal switch (Turn signal switch) | CAMRY_ACV40 RM00000197T007X.html | |
| 5. Headlight dimmer switch assembly | CAMRY_ACV40 RM0000014E3006X.html | |
| 6. Clock assembly | - | |
| 7. Harness or connector | - | |
| Turn signal lights do not operate in one direction. | 1. Headlight dimmer switch assembly (Turn signal switch) | CAMRY_ACV40 RM0000014E3006X.html |
| 2. Turn signal flasher assembly | CAMRY_ACV40 RM000001ZTV002X.html | |
| 3. Harness or connector | - | |
| Only one bulb does not operate. | 1. Bulb | - |
| 2. Harness or connector | - |
| Symptom | Suspected Area | See page |
| One side back-up light does not illuminate. | 1. Bulb | - |
| 2. Harness or connector | - | |
| Both left and right back-up lights do not illuminate. | 1. Bulb | - |
| 2. GAUGE No. 1 fuse | - | |
| 3. Back-up light switch (for M/T) | CAMRY_ACV40 RM0000017MP003X.html | |
| 4. Park/Neutral position switch (for U250E A/T) | CAMRY_ACV40 RM000000YWQ004X.html | |
| 5. Park/Neutral position switch (for U660E A/T) | CAMRY_ACV40 RM0000003W300TX.html | |
| 6. Harness or connector | - |
| Symptom | Suspected Area | See page |
| Only interior light does not illuminate. | 1. Bulb | - |
| 2. Personal light assembly (with sliding roof) | CAMRY_ACV40 RM00000197W004X.html | |
| 3. Rear room light assembly (without sliding roof) | CAMRY_ACV40 RM00000202I003X.html | |
| 4. Harness or connector | - | |
| Only ignition key cylinder light does not illuminate. | 1. Transponder key amplifier (Ignition key cylinder light) | CAMRY_ACV40 RM000001983007X.html |
| 2. Harness or connector | - | |
| Interior light and ignition key cylinder light do not operate normally. | 1. DOME fuse | - |
| 2. Personal light assembly | CAMRY_ACV40 RM00000197W004X.html | |
| 3. Rear room light assembly | CAMRY_ACV40 RM00000202I003X.html | |
| 4. Transponder key amplifier (Ignition key cylinder light) | CAMRY_ACV40 RM000001983007X.html | |
| 5. Door courtesy switch circuit | CAMRY_ACV40 RM0000011T3006X.html | |
| 6. Door lock position switch circuit | CAMRY_ACV40 RM0000011T8006X.html | |
| 7. Ignition switch circuit | CAMRY_ACV40 RM0000011SQ007X.html | |
| 8. Interior light circuit | CAMRY_ACV40 RM000001T9V003X.html | |
| 9. Main body ECU (Instrument panel J/B) | - |
| Symptom | Suspected Area | See page |
| Vanity light does not illuminate. | 1. Bulb | - |
| 2. Vanity light assembly | CAMRY_ACV40 RM00000197Z005X.html | |
| 3. Visor assembly (Vanity light switch) | - | |
| 4. Harness or connector | - |
| Symptom | Suspected Area | See page |
| Luggage compartment light does not illuminate. | 1. Bulb | - |
| 2. Luggage compartment light assembly | CAMRY_ACV40 RM000001983006X.html | |
| 3. Luggage compartment door lock assembly (Door courtesy switch) | CAMRY_ACV40 RM00000202P004X.html | |
| 4. Harness or connector | - |
| Symptom | Suspected Area | See page |
| Glove box light does not illuminate. | 1. Bulb | - |
| 2. Glove box light assembly | CAMRY_ACV40 RM000001980004X.html | |
| 3. Harness or connector | - |
| Symptom | Suspected Area | See page |
| Door courtesy light does not illuminate. | 1. Bulb | - |
| 1. Door courtesy light assembly | CAMRY_ACV40 RM000001YIR002X.html | |
| 2. Door courtesy switch | - | |
| 3. Harness or connector | - |
| Symptom | Suspected Area | See page |
| Front personal lights do not illuminate. | 1. Bulb | - |
| 2. Personal light assembly | CAMRY_ACV40 RM00000197W004X.html | |
| 3. Harness or connector | - | |
| Rear personal lights do not illuminate. | 1. Bulb | - |
| 2. Rear room light assembly | CAMRY_ACV40 RM00000202I003X.html | |
| 3. Harness or connector | - |
| Symptom | Suspected Area | See page |
| Automatic light control system does not operate normally. | 1. Light control switch circuit | CAMRY_ACV40 RM0000011M3007X.html |
| 2. Automatic light control sensor circuit | CAMRY_ACV40 RM0000011M1008X.html | |
| 3. Ignition switch circuit | CAMRY_ACV40 RM0000011SQ007X.html | |
| 4. Main body ECU (Instrument Panel J/B) | - |
| Symptom | Suspected Area | See page |
| Light auto turn off system does not operate normally. | 1. Light control switch circuit | CAMRY_ACV40 RM0000011M3007X.html |
| 2. Door courtesy switch circuit | CAMRY_ACV40 RM0000011T3006X.html | |
| 3. Main body ECU (Instrument Panel J/B) | - |
| Symptom | Suspected Area | See page |
| Battery saving function does not operate. | 1. Door courtesy switch circuit | CAMRY_ACV40 RM0000011T3006X.html |
| 2. Main body ECU (Instrument Panel J/B) | - |
| Symptom | Suspected Area | See page |
| Headlight beam level control does not operate. | 1. Headlight leveling switch | CAMRY_ACV40 RM0000017MI003X.html |
| 2. Headlight leveling motor | - | |
| 3. Harness or connector | - |
| Symptom | Suspected Area | See page |
| Headlight beam level control warning light comes on. | 1. Check the FAIL-SAFE function | CAMRY_ACV40 RM000002CE0000X.html |
| 2. Height control sensor circuit | CAMRY_ACV40 RM000000XVQ004X.html | |
| 3. Headlight beam level control warning circuit | CAMRY_ACV40 RM000001TA3001X.html | |
| 4. Headlight beam level control ECU | - | |
| Headlight beam level control does not operate (Warning light is off). | 1. Check the FAIL-SAFE function | CAMRY_ACV40 RM000002CE0000X.html |
| 2. Headlight beam level control actuator circuit | CAMRY_ACV40 RM0000011T7005X.html | |
| 3. Headlight signal circuit | CAMRY_ACV40 RM000000TZ100BX.html | |
| 4. Speed signal circuit | CAMRY_ACV40 RM000002GY300AX.html | |
| 5. Headlight beam level control ECU power source circuit | CAMRY_ACV40 RM0000011TZ005X.html | |
| 6. Headlight leveling motor | - | |
| 7. Combination meter assembly | - | |
| 8. Headlight beam level control ECU | - | |
| Headlight beam level warning light does not come on when turning the ignition switch to the ON position. | 1. Headlight beam level warning circuit | CAMRY_ACV40 RM000001TA3001X.html |
| 2. Headlight beam level control ECU power source circuit | CAMRY_ACV40 RM0000011TZ005X.html | |
| 3. Headlight beam level control ECU | - | |
| 4. Combination meter assembly | - |
- NOTICE:
- Initialize the headlight beam level control ECU after the vehicle height changes due to replacement of the suspension or after performing such operations as removal and reinstallation or replacement of the rear height control sensor sub-assembly.
- When the headlight beam level control ECU is replaced, the initialization is also necessary.