Cruise Control System. Camry. Acv40 Gsv40
Cruise Control. Camry. Acv40 Gsv40
Cruise Control System -- Problem Symptoms Table |
- HINT:
- Be sure to perform the SYMPTOM SIMULATION procedure before replacing the ECM. If these symptoms do not persist, the cause of the problem may be poor intermittent electrical contact (open or short) of a wire harness or connector.
| Symptom | Suspected Area | See page |
| Vehicle speed cannot be set. (The CRUISE main indicator light comes on.) | 1. Cruise control switch circuit | CAMRY_ACV40 RM000000PLU08BX.html |
| 2. Combination meter | CAMRY_ACV40 RM0000012G107SX.html | |
| 3. Vehicle speed sensor circuit | CAMRY_ACV40 RM000000ZRD05PX.html | |
| 4. Stop light switch circuit | CAMRY_ACV40 RM000000ZRE07BX.html | |
| 5. Transmission range sensor circuit (U250E) | CAMRY_ACV40 RM000000W8402HX.html | |
| 5. Park/Neutral position sensor circuit (U660E) | CAMRY_ACV40 RM0000025JZ001X.html | |
| 6. Clutch switch circuit (M/T) | CAMRY_ACV40 RM000000ZAN02KX.html | |
| 7. If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html | |
| 7. If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| Pushing the ON-OFF button does not turn the cruise control system on. (Vehicle speed cannot be set.) | 1. Stop light switch circuit | CAMRY_ACV40 RM000000ZRE07BX.html |
| 2. Clutch switch circuit (M/T) | CAMRY_ACV40 RM000000ZAN02KX.html | |
| 3. Vehicle speed sensor circuit | CAMRY_ACV40 RM000000ZRD05PX.html | |
| 4. Cruise control switch circuit | CAMRY_ACV40 RM000000PLU08BX.html | |
| 5. Transmission range sensor circuit (U250E) | CAMRY_ACV40 RM000000W8402HX.html | |
| 5. Park/Neutral position sensor circuit (U660E) | CAMRY_ACV40 RM0000025JZ001X.html | |
| 6. If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html | |
| 6. If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| The cruise control is canceled while it is operating. | 1. Stop light switch circuit | CAMRY_ACV40 RM000000ZRE07BX.html |
| 2. Clutch switch circuit (M/T) | CAMRY_ACV40 RM000000ZAN02KX.html | |
| 3. Transmission range sensor circuit (U250E) | CAMRY_ACV40 RM000000W8402HX.html | |
| 3. Park/Neutral position sensor circuit (U660E) | CAMRY_ACV40 RM0000025JZ001X.html | |
| 4. Cruise control switch circuit | CAMRY_ACV40 RM000000PLU08BX.html | |
| 5. Vehicle speed sensor circuit | CAMRY_ACV40 RM000000ZRD05PX.html | |
| 6. Combination meter | CAMRY_ACV40 RM0000012G107SX.html | |
| 7. If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html | |
| 7. If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| Pulling back on the control main switch does not cancel the cruise control. (The CRUISE main indicator light remains on.) | 1. Cruise control switch circuit | CAMRY_ACV40 RM000000PLU08BX.html |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html | |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| Pulling back on the control main switch does not cancel the cruise control. (The CRUISE main indicator light goes off.) | Replace ECM (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html |
| Replace ECM (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| The cruise control is not canceled when vehicle speed drops below the low speed limit. (The CRUISE main indicator light remains on.) | 1. Vehicle speed sensor circuit | CAMRY_ACV40 RM000000ZRD05PX.html |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html | |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| The cruise control is not canceled when vehicle speed drops below the low speed limit. (The CRUISE main indicator light goes off.) | Replace ECM (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html |
| Replace ECM (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| Depressing the brake pedal does not cancel the cruise control. (The CRUISE main indicator light remains on.) | 1. Stop light switch circuit | CAMRY_ACV40 RM000000ZRE07BX.html |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html | |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| Depressing the brake pedal does not cancel the cruise control. (The CRUISE main indicator light goes off.) | Replace ECM (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html |
| Replace ECM (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| Depressing the clutch pedal does not cancel the cruise control. (The CRUISE main indicator light remains on.) | 1. Clutch switch circuit (M/T) | CAMRY_ACV40 RM000000ZAN02KX.html |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html | |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| Depressing the clutch pedal does not cancel the cruise control. (The CRUISE main indicator light goes off.) | Replace ECM (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html |
| Replace ECM (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| Moving the shift lever does not cancel the cruise control | 1. Transmission range sensor circuit (U250E) | CAMRY_ACV40 RM000000W8402HX.html |
| 1. Park/Neutral position sensor circuit (U660E) | CAMRY_ACV40 RM0000025JZ001X.html | |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html | |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| Hunting (Speed is not constant.) | 1. Vehicle speed sensor circuit | CAMRY_ACV40 RM000000ZRD05PX.html |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html | |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html | |
| The CRUISE main indicator light remains blinking | 1. TC and CG terminal circuit | CAMRY_ACV40 RM000000V6100UX.html |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO02YX.html | |
| 2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT01EX.html |