Cruise Control System. Camry. Acv40 Gsv40
Cruise Control. Camry. Acv40 Gsv40
Cruise Control System -- Problem Symptoms Table |
- HINT:
- Be sure to perform the SYMPTOM SIMULATION procedure before replacing the ECM. If these symptoms do not persist, the cause of the problem may be poor intermittent electrical contact (open or short) of a wire harness or connector.
Symptom | Suspected Area | See page |
Vehicle speed cannot be set. (The CRUISE main indicator light comes on.) | 1. Cruise control switch circuit | CAMRY_ACV40 RM000000PLU010X.html |
2. Combination meter | CAMRY_ACV40 RM0000012G100UX.html | |
3. Vehicle speed sensor circuit | CAMRY_ACV40 RM000000ZRD00NX.html | |
4. Stop light switch circuit | CAMRY_ACV40 RM000000ZRE00OX.html | |
5. Transmission range sensor circuit (U250E) | CAMRY_ACV40 RM000000W8402HX.html | |
5. Park/Neutral position sensor circuit (U660E) | CAMRY_ACV40 RM0000025JZ001X.html | |
6. Clutch switch circuit (M/T) | CAMRY_ACV40 RM000000ZAN00AX.html | |
7. If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html | |
7. If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html | |
Pushing the ON-OFF button does not turn the cruise control system on. (Vehicle speed cannot be set.) | 1. Stop light switch circuit | CAMRY_ACV40 RM000000ZRE00OX.html |
2. Clutch switch circuit (M/T) | CAMRY_ACV40 RM000000ZAN00AX.html | |
3. Vehicle speed sensor circuit | CAMRY_ACV40 RM000000ZRD00NX.html | |
4. Cruise control switch circuit | CAMRY_ACV40 RM000000PLU010X.html | |
5. Transmission range sensor circuit (U250E) | CAMRY_ACV40 RM000000W8402HX.html | |
5. Park/Neutral position sensor circuit (U660E) | CAMRY_ACV40 RM0000025JZ001X.html | |
6. If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html | |
6. If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html | |
The cruise control is canceled while it is operating. | 1. Stop light switch circuit | CAMRY_ACV40 RM000000ZRE00OX.html |
2. Clutch switch circuit (M/T) | CAMRY_ACV40 RM000000ZAN00AX.html | |
3. Transmission range sensor circuit (U250E) | CAMRY_ACV40 RM000000W8402HX.html | |
3. Park/Neutral position sensor circuit (U660E) | CAMRY_ACV40 RM0000025JZ001X.html | |
4. Cruise control switch circuit | CAMRY_ACV40 RM000000PLU010X.html | |
5. Vehicle speed sensor circuit | CAMRY_ACV40 RM000000ZRD00NX.html | |
6. Combination meter | CAMRY_ACV40 RM0000012G100UX.html | |
7. If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html | |
7. If the symptoms still occur after the above areas have been inspected and have proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html | |
Pulling back on the control main switch does not cancel the cruise control. (The CRUISE main indicator light remains on.) | 1. Cruise control switch circuit | CAMRY_ACV40 RM000000PLU010X.html |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html | |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html | |
Pulling back on the control main switch does not cancel the cruise control. (The CRUISE main indicator light goes off.) | Replace ECM (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html |
Replace ECM (2GR-FE) | CAMRY_ACV40 RM0000022NS002X.html | |
The cruise control is not canceled when vehicle speed drops below the low speed limit. (The CRUISE main indicator light remains on.) | 1. Vehicle speed sensor circuit | CAMRY_ACV40 RM000000ZRD00NX.html |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html | |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html | |
The cruise control is not canceled when vehicle speed drops below the low speed limit. (The CRUISE main indicator light goes off.) | Replace ECM (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html |
Replace ECM (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html | |
Depressing the brake pedal does not cancel the cruise control. (The CRUISE main indicator light remains on.) | 1. Stop light switch circuit | CAMRY_ACV40 RM000000ZRE00OX.html |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html | |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html | |
Depressing the brake pedal does not cancel the cruise control. (The CRUISE main indicator light goes off.) | Replace ECM (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html |
Replace ECM (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html | |
Depressing the clutch pedal does not cancel the cruise control. (The CRUISE main indicator light remains on.) | 1. Clutch switch circuit (M/T) | CAMRY_ACV40 RM000000ZAN00AX.html |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html | |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html | |
Depressing the clutch pedal does not cancel the cruise control. (The CRUISE main indicator light goes off.) | Replace ECM (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html |
Replace ECM (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html | |
Moving the shift lever does not cancel the cruise control | 1. Transmission range sensor circuit (U250E) | CAMRY_ACV40 RM000000W8402HX.html |
1. Park/Neutral position sensor circuit (U660E) | CAMRY_ACV40 RM0000025JZ001X.html | |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html | |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html | |
Hunting (Speed is not constant.) | 1. Vehicle speed sensor circuit | CAMRY_ACV40 RM000000ZRD00NX.html |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html | |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html | |
The CRUISE main indicator light remains blinking | 1. TC and CG terminal circuit | CAMRY_ACV40 RM000000V6100UX.html |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2AZ-FE) | CAMRY_ACV40 RM0000017UO009X.html | |
2. If the symptoms still occur after the above area has been inspected and has proven to be normal, replace the ECM. (2GR-FE) | CAMRY_ACV40 RM0000022NT002X.html |