Intake air temperature sensor 2AD-FHV

Components Intake air temperature sensor 2AD-FHV

Removal Intake air temperature sensor 2AD-FHV

Inspection Intake air temperature sensor 2AD-FHV

Installation Intake air temperature sensor 2AD-FHV

Intake air temperature sensor 2AD-FHV
Components

Intake air temperature sensor 2AD-FHV
Removal

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

1. Remove the 4 bolts, 12 clips and engine under cover.

1. Disconnect the sensor connector.

2. Remove the sensor and gasket.

Intake air temperature sensor 2AD-FHV
Inspection

1. Measure the resistance between the terminals.  

   
    

   Standard resistance:

   Temperature	Specified Condition
   Approx. 20°C (68°F)	2.21 to 2.65 k?

   NOTICE:

   While checking the inlet air temperature sensor in water, be careful not to allow water to enter the terminals. After checking, wipe off any water on the inlet air temperature sensor.

   If the result is not as specified, replace the sensor.

Intake air temperature sensor 2AD-FHV
Installation

1. Install a new gasket to the sensor.

2. Install the sensor.

   Torque: 

   34.3 N*m{ 350 kgf*cm , 25 ft.*lbf }

3. Connect the sensor connector.

1. Install the engine under cover with the 12 clips and 4 bolts.