Clean the bolt and the bolt hole.

Loosen the bolt of the park/neutral position switch and move the shift lever to N.

Measure the resistance according to the value(s) in the table below.

Disconnect the air fuel ratio sensor connector.

Apply the parking brake and turn the ignition switch to ON.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 AB60F AUTOMATIC TRANSMISSION / TRANSAXLE

Install the switch to the manual valve shaft.

Loosen the bolt of the park/neutral position switch and move the shift lever to N.

Measure the resistance according to the value(s) in the table below.

Remove the clip and pin, and disconnect the shifting rod from the transmission control shaft lever RH.