INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  2 (RB) - 6 (PL)	Shift lever in P	Below 1 Ω
  2 (RB) - 6 (PL)	Shift lever not in P	10 kΩ or higher
  2 (RB) - 1 (RL)	Shift lever in R	Below 1 Ω
  2 (RB) - 1 (RL)	Shift lever not in R	10 kΩ or higher
  2 (RB) - 9 (NL)	Shift lever in N	Below 1 Ω
  2 (RB) - 9 (NL)	Shift lever not in N	10 kΩ or higher
  2 (RB) - 7 (DL)	Shift lever in D or S	Below 1 Ω
  2 (RB) - 7 (DL)	Shift lever not in D or S	10 kΩ or higher
  4 (B) - 5 (L)	Shift lever in P or N	Below 1 Ω
  4 (B) - 5 (L)	Shift lever not in P or N	10 kΩ or higher

If the result is not as specified, replace the switch.