DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

Remove the clip and pin, and disconnect the shifting rod from the transmission control shaft lever RH.

Disconnect the switch connector.

Remove the nut, spring washer and transmission control shaft lever RH.

Remove the collar and transmission control rod bush from the transmission control shaft lever RH.

Using a screwdriver, bend the tabs of the lock washer.

Remove the lock nut and lock washer.

Remove the bolt and switch.

• HINT:

• Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.