Generator - Installation
Temporarily install the generator with the 2 stud bolts.
Generator - Reassembly
Place the drive end frame on the pulley.
Generator - Inspection
Rotate the bearing and check that there is no abnormal noise and that it rotates smoothly.
If necessary, replace the bearing ().
Generator - Disassembly
Hold SST 1-A with a torque wrench, and tighten SST 1-B clockwise to the specified torque.
Generator - Removal
Remove the 3 bolts and screw.
Generator - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 1VD-FTV BATTERY / CHARGING
Generator - Installation
Install the stud bolt.
Generator - Reassembly
Using SST and a press, press in a new drive end frame bearing.
Generator - Inspection
Check the resistance.
Generator - Disassembly
Mount the generator in a vise between aluminum plates.