Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE BATTERY / CHARGING

Install the 2 generator brackets with the 2 bolts.

Using SST and a press, press in a new generator drive end frame bearing.

Hold the center of the pulley, and confirm that the outer ring turns counterclockwise and does not turn clockwise.

If the result is not as specified, replace the clutch pulley.

Using a screwdriver, remove the generator pulley cap.

Remove the 11 clips and intake duct seal.

Lexus IS250 IS220d GSE20 ALE20 4GR-FSE CHARGING

Install the clamp bracket to the generator assembly with the bolt (B).

Using SST and a press, press in a new drive end frame bearing.