REMOVE MANUAL TRANSMISSION ASSEMBLY

REMOVE FRONT BEARING RETAINER (MTM)

REMOVE TRANSMISSION FRONT BEARING RETAINER OIL SEAL

INSTALL TRANSMISSION FRONT BEARING RETAINER OIL SEAL

INSTALL FRONT BEARING RETAINER (MTM)

INSTALL MANUAL TRANSMISSION ASSEMBLY

Remove the manual transmission ().

Remove the 8 bolts and front bearing retainer.

Using a screwdriver, pry out the oil seal.

• NOTICE:

• Be careful not to damage the oil seal and front bearing retainer contact surfaces.

• HINT:

• Tape the screwdriver tip before use.

Using SST and a press, drive in a new oil seal.

• SST
• 09950-60010(09951-00460)
  09950-70010(09951-07150)

• Standard Drive in Depth:
• 15.4 to 16.2 mm (0.607 to 0.637 in.)

Apply gear oil to the lip of the oil seal.

Apply seal packing to the front bearing retainer, as shown in the illustration.

• Seal Packing:
• Toyota Genuine Seal Packing 1281, Three Bond 1281 or equivalent

• NOTICE:

• Parts must be assembled within 10 minutes of application. Otherwise, the packing (FIPG) material must be removed and reapplied.

Apply adhesive to 2 or 3 threads of the bolts.

• Adhesive:
• Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

Install the front bearing retainer with the 8 bolts.

• Torque:
• 17 N*m{ 170 kgf*cm, 12 ft.*lbf}

Install the manual transmission ().