Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - H150F MANUAL TRANSMISSION / TRANSAXLE
TRANSMISSION CASE OIL SEAL - REPLACEMENT
| 1. REMOVE MANUAL TRANSMISSION ASSEMBLY |
Remove the manual transmission ().
| 2. REMOVE FRONT BEARING RETAINER (MTM) |
Remove the 8 bolts and front bearing retainer.
| 3. REMOVE TRANSMISSION FRONT BEARING RETAINER OIL SEAL |
Using a screwdriver, pry out the oil seal.
- NOTICE:
- Be careful not to damage the oil seal and front bearing retainer contact surfaces.
- HINT:
- Tape the screwdriver tip before use.
| 4. INSTALL TRANSMISSION FRONT BEARING RETAINER OIL SEAL |
Using SST and a press, drive in a new oil seal.
- SST
- 09950-60010(09951-00460)
09950-70010(09951-07150)
- Standard Drive in Depth:
- 15.4 to 16.2 mm (0.607 to 0.637 in.)
Apply gear oil to the lip of the oil seal.
| 5. INSTALL FRONT BEARING RETAINER (MTM) |
Apply seal packing to the front bearing retainer, as shown in the illustration.
- Seal Packing:
- Toyota Genuine Seal Packing 1281, Three Bond 1281 or equivalent
- NOTICE:
- Parts must be assembled within 10 minutes of application. Otherwise, the packing (FIPG) material must be removed and reapplied.
Apply adhesive to 2 or 3 threads of the bolts.
- Adhesive:
- Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
Install the front bearing retainer with the 8 bolts.
- Torque:
- 17 N*m{ 170 kgf*cm, 12 ft.*lbf}
| 6. INSTALL MANUAL TRANSMISSION ASSEMBLY |
Install the manual transmission ().