Rear Seat Outer Belt Assembly Removal

Restraints. Lexus Gs430, Gs300. Uzs190 Grs190
Seat Belt. Lexus Gs430, Gs300. Uzs190 Grs190

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE REAR SEAT CUSHION ASSEMBLY

  3. REMOVE REAR SEAT HEADREST ASSEMBLY RH AND LH

  4. REMOVE REAR SEATBACK ASSEMBLY

  5. REMOVE REAR DOOR SCUFF PLATE

  6. REMOVE REAR SEAT SIDE GARNISH

  7. REMOVE ROOF SIDE GARNISH

  8. REMOVE REAR SEAT OUTER BELT ANCHOR

  9. REMOVE REAR SEAT INNER WITH CENTER BELT ANCHOR RH

  10. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Sunshade)

  11. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

  12. REMOVE REAR SEAT OUTER BELT ASSEMBLY

Rear Seat Outer Belt Assembly -- Removal


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the RH side.
  3. A bolt without a torque specification is shown in the standard bolt chart (Click here).


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE REAR SEAT CUSHION ASSEMBLY


Lexus Gs430, Gs300. Uzs190 Grs190.Seat Belt.Seat Belt Tension Reducer.Rear Seat Outer Belt Assembly Removal

  1. Detach the seat cushion's 2 front hooks from the vehicle body.

    NOTICE:
    Follow the instructions below carefully as the cushion frame deforms easily.

    1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

    2. Repeat for the other hook.

  1. Detach the seat cushion's 2 rear hooks from the seatback.

  1. Remove the seat cushion.



3. REMOVE REAR SEAT HEADREST ASSEMBLY RH AND LH


4. REMOVE REAR SEATBACK ASSEMBLY



Lexus Gs430, Gs300. Uzs190 Grs190.Seat Belt.Seat Belt Tension Reducer.Rear Seat Outer Belt Assembly Removal

  1. Using a screwdriver, detach the claws and remove the 2 rear seat covers.

    HINT:
    Tape the screwdriver tip before use.


    Lexus Gs430, Gs300. Uzs190 Grs190.Seat Belt.Seat Belt Tension Reducer.Rear Seat Outer Belt Assembly Removal

  1. Using a screwdriver, detach the claw to open the cap of the 3 rear seat shoulder belt guides.

  1. Remove the bolt and floor anchor part.



    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Remove the 4 bolts and 2 nuts.

  1. Remove the seatback.



5. REMOVE REAR DOOR SCUFF PLATE


Lexus Gs430, Gs300. Uzs190 Grs190

  1. Detach the 5 claws and remove the scuff plate.



6. REMOVE REAR SEAT SIDE GARNISH


Lexus Gs430, Gs300. Uzs190 Grs190

  1. Using a moulding remover, pull the garnish in the direction indicated by the arrow in the illustration to detach the 5 claws. Then remove the garnish.



7. REMOVE ROOF SIDE GARNISH


Lexus Gs430, Gs300. Uzs190 Grs190

  1. Detach the 4 clips.

  1. Pull the garnish in the direction indicated by the arrow in the illustration to detach the 2 claws. Then remove the garnish.



8. REMOVE REAR SEAT OUTER BELT ANCHOR


    Lexus Gs430, Gs300. Uzs190 Grs190

  1. Remove the bolt and anchor part of the rear seat outer belt assembly.



9. REMOVE REAR SEAT INNER WITH CENTER BELT ANCHOR RH


Lexus Gs430, Gs300. Uzs190 Grs190.Seat Belt.Seat Belt Tension Reducer.Rear Seat Outer Belt Assembly Removal

  1. Disconnect the connector labeled A.

  1. Remove the bolt and seat belt labeled B.



10. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Sunshade)


    Lexus Gs430, Gs300. Uzs190 Grs190.Seat Belt.Seat Belt Tension Reducer.Rear Seat Outer Belt Assembly Removal

  1. Using a moulding remover, detach the 4 claws and remove the belt guide LH.

    HINT:
    Use the same procedures described for the RH side.


    Lexus Gs430, Gs300. Uzs190 Grs190.Seat Belt.Seat Belt Tension Reducer.Rear Seat Outer Belt Assembly Removal

  1. Using a moulding remover, detach the 4 claws and remove the belt guide center.



    Lexus Gs430, Gs300. Uzs190 Grs190.Seat Belt.Seat Belt Tension Reducer.Rear Seat Outer Belt Assembly Removal

  1. Detach the clip and remove the panel.



11. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY


Lexus Gs430, Gs300. Uzs190 Grs190.Seat Belt.Seat Belt Tension Reducer.Rear Seat Outer Belt Assembly Removal

  1. Using a moulding remover, detach the 4 claws and remove the guide part of the rear seat outer belt assembly.



    Lexus Gs430, Gs300. Uzs190 Grs190.Seat Belt.Seat Belt Tension Reducer.Rear Seat Outer Belt Assembly Removal

  1. Using a moulding remover, detach the 4 claws and remove the guide part of the rear seat inner with center belt assembly RH.



    Lexus Gs430, Gs300. Uzs190 Grs190.Seat Belt.Seat Belt Tension Reducer.Rear Seat Outer Belt Assembly Removal

  1. Detach the clip and 5 claws.

  1. Disconnect the connector and remove the package tray trim panel.



12. REMOVE REAR SEAT OUTER BELT ASSEMBLY


    Lexus Gs430, Gs300. Uzs190 Grs190.Seat Belt.Seat Belt Tension Reducer.Rear Seat Outer Belt Assembly Removal

  1. Disconnect the pretensioner connector, as shown in the illustration.

  1. Disconnect the tension reducer connector.



    Lexus Gs430, Gs300. Uzs190 Grs190.Seat Belt.Seat Belt Tension Reducer.Rear Seat Outer Belt Assembly Removal

  1. Remove the 2 bolts and seat belt.