Rear Door Speaker Inspection
INSPECT REAR SPEAKER SET (except 14 Speakers)
INSPECT REAR SPEAKER SET (for 14 Speakers)
INSPECT REAR NO. 3 SPEAKER ASSEMBLY (for 14 Speakers)
Rear Door Speaker -- Inspection |
1. INSPECT REAR SPEAKER SET (except 14 Speakers) |
Measure the resistance according to the value(s) in the table below.
Text in Illustration*1
| Component without harness connected (Rear Speaker Set)
|
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
1 - 2
| Always
| 4 Ω
|
If the result is not as specified, replace the speaker set.
2. INSPECT REAR SPEAKER SET (for 14 Speakers) |
Measure the resistance according to the value(s) in the table below.
Text in Illustration*1
| Component without harness connected (Rear Speaker Set)
|
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
1 - 2
| Always
| 1.5 to 2.3 Ω
|
If the result is not as specified, replace the speaker set.
3. INSPECT REAR NO. 3 SPEAKER ASSEMBLY (for 14 Speakers) |
When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.
- OK:
- Malfunction disappears.
- HINT:
- Connect all the connectors to the rear No. 3 speakers.
- When there is a possibility that either the right or left rear speaker is defective, inspect by interchanging the right one with the left one.
- Perform the inspection above on both LH and RH sides.