Fuel Lid Lock Control Cable Assembly (For Extra Cab) -- Installation |
| 1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER |
 |
Install the fuel filler opening lid lock retainer and turn it counterclockwise as shown in the illustration.
| 2. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY |
Install the fuel lid lock control cable and turn the fuel filler opening lid lock retainer clockwise as shown in the illustration.
 |
Attach the cable to the clamps shown in the illustration.
Install the grommet to the vehicle body.
Install the fuel lid lock open lever.
Text in Illustration *1 Fuel Lid Lock Open Lever *2 Grommet
| 3. INSTALL REAR WHEEL HOUSE LINER LH |
Install the rear wheel house liner.
| 4. INSTALL REAR NO. 1 WHEEL OPENING EXTENSION SUB-ASSEMBLY LH (w/ Over Fender) |
Install 11 new clips to the rear No. 1 wheel opening extension.
Attach the 11 clips to install the rear No. 1 wheel opening extension.
Install the 5 screws.
| 5. INSTALL FRONT FLOOR CARPET ASSEMBLY |
Install the front floor carpet.
| 6. INSTALL QUARTER INSIDE TRIM BOARD LH |
Attach the 7 clips, 3 guides and 4 claws to install the quarter inside trim board.
Install the front door opening trim.
Connect the front seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
| 7. INSTALL COWL SIDE TRIM BOARD LH |
Attach the 2 clips to install the cowl side trim board.
Install the clip.
Install the front door opening trim.
| 8. INSTALL FRONT DOOR SCUFF PLATE LH |
Attach the 4 clips and 8 claws to install the front door scuff plate.
| 9. INSTALL LOWER BACK PANEL GARNISH |
Attach the 5 clips, 2 guides and 6 claws to install the lower back panel garnish.
| 10. INSTALL REAR SEATBACK ASSEMBLY |
Place the rear seatback assembly in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
 |
Attach the 2 hooks to the vehicle body.
Install the rear seatback assembly with the 2 bolts.
- Torque:
- 39 N*m{398 kgf*cm, 29 in.*lbf}
| 11. INSTALL UPPER BACK PANEL GARNISH |
Attach the 5 clips and 4 claws to install the upper back panel garnish.
| 12. INSTALL REAR SEAT CUSHION ASSEMBLY LH (w/ Seat Cushion) |
Attach the 2 hooks.
 |
Attach the hook to install the rear seat cushion assembly LH.
 |
| 13. INSTALL REAR SEAT CUSHION ASSEMBLY RH (w/ Seat Cushion) |
- HINT:
- Use the same procedures described for the LH side.
| 14. INSTALL CONSOLE BOX ASSEMBLY |
| 15. INSTALL FRONT SEAT ASSEMBLY LH |
| 16. INSTALL FRONT SEAT ASSEMBLY RH |
- HINT:
- Use the same procedure described for the RH side.