Front Seat Assembly (For Separate Seat Type) -- Installation |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. INSTALL FRONT SEAT ASSEMBLY |
Place the front seat assembly in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Connect the connector and attach the wire harness clamp under the seat.
for Front Passenger Side, w/ Seat Belt Warning system:
Connect the connector and attach the wire harness clamp under the seat.
Temporarily install the front seat assembly with the 4 bolts.
Lift up the seat track handle sub-assembly LH and move the seat to the rearmost position.
Tighten the bolts in the order shown in the illustration.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
 |
Lift up the seat track handle sub-assembly LH and move the seat to the foremost position.
Tighten the bolts in the order shown in the illustration.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
 |
| 2. INSTALL FRONT SEAT HEADREST ASSEMBLY |
Install the front seat headrest assembly.
| 3. INSTALL SEAT TRACK COVER LH (w/ Cover) |
Attach the 2 claws in the order shown in the illustration to install the seat track cover LH.
- NOTICE:
- Be careful not to damage the claws.
 |
| 4. INSTALL INNER SEAT TRACK BRACKET COVER LH (w/ Cover) |
Attach the 2 claws in the order shown in the illustration to install the inner seat track bracket cover LH.
- NOTICE:
- Be careful not to damage the claws.
 |