Vehicle Interior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Seat Belt. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Front Seat Outer Belt Assembly (For Single Cab) -- Installation |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- A bolt without a torque specification is shown in the standard bolt chart (HILUX_TGN26 RM00000118R007X.html).
| 1. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH |
 |
Align the outer belt positioning holes with the claws and install the retractor of the front seat outer belt assembly LH with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Install the front seat outer belt shoulder anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Close the cover and attach the 2 claws.
 |
| 2. INSTALL LOWER QUARTER TRIM PANEL LH |
Attach the 3 clips, claw and 2 guides to install the lower quarter trim panel LH.
Install the front seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
| 3. INSTALL FRONT DOOR OPENING TRIM LH |
 |
Align the paint mark on the front door opening trim with the mark position on the vehicle and install the front door opening trim as shown in the illustration.
Text in Illustration *1 Paint Mark *2 Mark Position
| 4. INSTALL FRONT DOOR SCUFF PLATE LH |
Attach the 4 clips and 8 claws to install the front door scuff plate.
| 5. INSTALL FRONT SEAT ASSEMBLY |
for Separate Seat:
(HILUX_TGN26 RM000000Z8T0APX.html)
for Bench Seat Type:
(HILUX_TGN26 RM000000Z8Y00EX.html)