Automatic Transmission System (For 1Kd-Ftv With I-Art) L4 Position Switch Circuit

Drivetrain. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
A750F Automatic Transmission Transaxle. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (NO. 1 TRANSFER INDICATOR SWITCH - BODY GROUND)

INSPECT NO. 1 TRANSFER INDICATOR SWITCH

CHECK HARNESS AND CONNECTOR (NO. 1 TRANSFER INDICATOR SWITCH - TCM)

AUTOMATIC TRANSMISSION SYSTEM (for 1KD-FTV with i-ART) - L4 Position Switch Circuit


DESCRIPTION

The No. 1 transfer indicator switch (the transfer L4 position switch) detects the gear position of the transfer shift lever. Moving the transfer shift lever to L4 turns the No. 1 transfer indicator switch (the transfer L4 position switch) on. Then the TCM cancels operation of the lock-up clutch.

WIRING DIAGRAM


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.A750F Automatic Transmission Transaxle.Automatic Transmission System (For 1Gr-Fe).Automatic Transmission System (For 1Kd-Ftv With I-Art) L4 Position Switch Circuit


INSPECTION PROCEDURE

1.CHECK HARNESS AND CONNECTOR (NO. 1 TRANSFER INDICATOR SWITCH - BODY GROUND)


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.A750F Automatic Transmission Transaxle.Automatic Transmission System (For 1Gr-Fe).Automatic Transmission System (For 1Kd-Ftv With I-Art) L4 Position Switch Circuit

  1. Disconnect the No. 1 transfer indicator switch connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    C29-2 - Body ground
    		Always
    		Below 1 Ω
    Text in Illustration
    *a
    		Front view of wire harness connector
    (to No. 1 Transfer Indicator Switch)


NG
REPAIR OR REPLACE HARNESS AND CONNECTOR
OK


2.INSPECT NO. 1 TRANSFER INDICATOR SWITCH


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.A750F Automatic Transmission Transaxle.Automatic Transmission System (For 1Gr-Fe).Automatic Transmission System (For 1Kd-Ftv With I-Art) L4 Position Switch Circuit

  1. Remove the No. 1 transfer indicator switch.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    1 - 2
    		Not pushed
    		10 kΩ or higher
    1 - 2
    		Pushed
    		Below 1 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (No. 1 Transfer Indicator Switch)
    *b
    		Pushed
    *c
    		Not pushed


NG
REPLACE NO. 1 TRANSFER INDICATOR SWITCH (HILUX_TGN26 RM00000479C008X.html)
OK


3.CHECK HARNESS AND CONNECTOR (NO. 1 TRANSFER INDICATOR SWITCH - TCM)

  1. Disconnect the C29 No. 1 transfer indicator switch connector.

  1. Disconnect the G40 TCM connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    C29-1 - G40-15 (L4)
    		Always
    		Below 1 Ω
    C29-1 or G40-15 (L4) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS AND CONNECTOR
OK

REPLACE TCM (HILUX_TGN26 RM0000048F3005X.html)