Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Cruise Control. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Cruise Control System -- Problem Symptoms Table |
- HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
| Symptom | Suspected Area | See page |
| Cruise control main switch cannot be turned on (Cruise control indicator in combination meter does not illuminate) | Cruise control switch circuit | HILUX_TGN26 RM0000048ZC00BX.html |
| Harness or connector | - | |
| Combination meter assembly | HILUX_TGN26 RM000000THS02OX.html | |
| ECM | HILUX_TGN26 RM0000013Z001IX.html | |
| SET does not operate or CANCEL operates when it should not (DTC is not output) | Cruise control switch circuit | HILUX_TGN26 RM0000048ZC00BX.html |
| Automatic transmission system (A340F) | HILUX_TGN26 RM000000W6Z0XYX.html | |
| Automatic transmission system (A750F) | HILUX_TGN26 RM000000W6Z0Y1X.html | |
| ECD system (w/ EGR cooler) | HILUX_TGN26 RM0000012WB06VX.html | |
| ECD system (w/o EGR cooler) | HILUX_TGN26 RM0000012WB06WX.html | |
| ECD system (for i-ART) | HILUX_TGN26 RM0000012WB06XX.html | |
| ECM | HILUX_TGN26 RM0000013Z001IX.html | |
| Actual vehicle speed deviates above or below set speed | Meter / gauge system | HILUX_TGN26 RM000002Z4L03IX.html |
| ECM | HILUX_TGN26 RM0000013Z001IX.html | |
| Cruise control not canceled when brake pedal is depressed | Stop light switch circuit | HILUX_TGN26 RM000000ZRE0A6X.html |
| ECM | HILUX_TGN26 RM0000013Z001IX.html | |
| Moving shift lever does not cancel cruise control | Automatic transmission system (A340F) | HILUX_TGN26 RM000000W6Z0XYX.html |
| Automatic transmission system (A750F) | HILUX_TGN26 RM000000W6Z0Y1X.html | |
| ECM | HILUX_TGN26 RM0000013Z001IX.html | |
| Control switch does not operate (-SET, +RES, CANCEL not possible) | Cruise control switch circuit | HILUX_TGN26 RM0000048ZC00BX.html |
| ECM | HILUX_TGN26 RM0000013Z001IX.html | |
| SET is possible at less than approximately 40 km/h (25 mph), or CANCEL does not operate | Meter / gauge system | HILUX_TGN26 RM000002Z4L03IX.html |
| ECM | HILUX_TGN26 RM0000013Z001IX.html | |
| Poor response in ACCEL and RESUME modes | Cruise control switch circuit | HILUX_TGN26 RM0000048ZC00BX.html |
| ECM | HILUX_TGN26 RM0000013Z001IX.html | |
| DTC memory is cleared | ECM | HILUX_TGN26 RM0000013Z001IX.html |
| DTC is not output or is output when it should not be | TC and CG terminal circuit | HILUX_TGN26 RM0000048ZG006X.html |
| Cruise control indicator light does not illuminate | Cruise control switch circuit | HILUX_TGN26 RM0000048ZC00BX.html |
| Harness or connector | - | |
| Combination meter assembly | HILUX_TGN26 RM000000THS02OX.html | |
| ECM | HILUX_TGN26 RM0000013Z001IX.html |