Lubrication System On-Vehicle Inspection

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Tr-Fe Lubrication. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. CHECK ENGINE OIL LEVEL

  2. INSPECT ENGINE OIL QUALITY

  3. CHECK OIL PRESSURE

Lubrication System -- On-Vehicle Inspection



1. CHECK ENGINE OIL LEVEL

  1. Warm up the engine, stop the engine and wait 5 minutes.

  1. Check that the oil level is between the dipstick low level mark and full level mark.
    If the level is low, check for leakage and add oil up to the full level mark.

    NOTICE:
    Do not fill engine oil above the full level mark.


2. INSPECT ENGINE OIL QUALITY

  1. Check the oil for deterioration, water contamination, discoloration or thinning. If the quality is visibly poor, replace the oil and filter (HILUX_TGN26 RM000000YM5016X.html).



3. CHECK OIL PRESSURE

  1. Remove the engine oil pressure switch assembly (HILUX_TGN26 RM000003PJP011X.html).



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.2Tr-Fe Lubrication.Lubrication System.Lubrication System On-Vehicle Inspection

  1. Install an oil pressure gauge.

    Text in Illustration
    *1
    		Oil Pressure Gauge

  1. Warm up the engine.

  1. Measure the oil pressure.

    Standard Oil Pressure:
    Condition
    		Specified Condition
    Idle
    		29 kPa (0.3 kgf/cm2, 4.2 psi) or higher
    3000 rpm
    		160 to 490 kPa (1.6 to 5.0 kgf/cm2, 23 to 71 psi)
    If the oil pressure is not as specified, check the oil pump (HILUX_TGN26 RM000000YM801LX.html).

  1. Remove the oil pressure gauge.

  1. Install the engine oil pressure switch assembly (HILUX_TGN26 RM000003PJM011X.html).