Dtc C2176/76 Receiver Error
DESCRIPTION
INSPECTION PROCEDURE
CHECK DTC OUTPUT (C2176/76)
DTC C2176/76 Receiver Error |
DESCRIPTION
The signals are transmitted to the tire pressure warning ECU and receiver on the body as radio waves.DTC No.
| DTC Detection Condition
| Trouble Area
|
C2176/76
| Malfunction in the tire pressure warning ECU and receiver internal circuit
| Tire pressure warning ECU and receiver
|
INSPECTION PROCEDURE
- NOTICE:
- When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the Techstream and write them down before removal.
- It is necessary to perform initialization (YARIS_NCP93 RM000000XMZ073X.html) after registration (YARIS_NCP93 RM000000XN107WX.html) of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.
- When replacing the tire pressure warning ECU and receiver on vehicles equipped with the wireless door lock control system, be sure to perform Registration of Recognition Code to register the transmitter IDs after ECU replacement (YARIS_NCP93 RM0000023D302UX.html).
| 1.CHECK DTC OUTPUT (C2176/76) |
Clear the DTCs (YARIS_NCP93 RM000000XMX07HX.html).
Turn the ignition switch off.
Turn the ignition switch to ON and check for DTCs (YARIS_NCP93 RM000000XMX07HX.html).
- OK:
- DTC C2176/76 is not output.