Hood Lock Control Cable Assembly Removal

Put protective tape around the side mudguard.

Remove the 2 clips.

Remove the 3 screws.

Remove the 9 retainers.

Disengage the 8 clips and remove the side mudguard.

Remove the 8 clips and 3 screws.

Remove the 3 grommets and the front fender liner.

HINT:

The grommets need to be replaced with new ones because they will break when they are removed.

Remove the 3 bolts from the hood lock assembly.

Disconnect the hood lock control cable and remove the hood lock assembly.

Disconnect the hood lock control cable and remove the hood lock control lever.

Using a screwdriver, disconnect the clamps shown in the illustration.

HINT:

Tape the screwdriver tip before use.

Pull the cable from the engine compartment and remove it.