REMOVE REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY LH (w/ Rear Fender Mudguard)
REMOVE REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY RH (w/ Rear Fender Mudguard)
REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP (w/ Assist Grip)
Rear Combination Light Assembly -- Removal |
1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT |
2. REMOVE SPARE WHEEL COVER CLAMP |
3. REMOVE SPARE WHEEL COVER ASSEMBLY |
4. REMOVE LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY |
Remove the bolt.
![]() |
Disengage the clip and remove the luggage compartment side tray assembly.
5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK |
Remove the 2 screws and the 2 No. 1 luggage compartment trim hooks.
![]() |
6. REMOVE REAR FLOOR FINISH PLATE |
Disengage the 7 clips and remove the rear floor finish plate.
![]() |
7. REMOVE REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY LH (w/ Rear Fender Mudguard) |
Remove the 3 screws and rear quarter panel mudguard sub-assembly LH.
![]() |
8. REMOVE REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY RH (w/ Rear Fender Mudguard) |
9. REMOVE REAR BUMPER ASSEMBLY |
Put protective tape around the rear bumper assembly.
![]() |
Using a screwdriver, open the 2 rear bumper plates.
- HINT:
- Tape the screwdriver tip before use.
![]() |
Remove the 6 screws and 2 clips.
![]() |
Disengage the 12 claws and disconnect the rear bumper assembly as shown in the illustration.
- HINT:
- Use the same procedure for the RH side and LH side.
![]() |
w/ TOYOTA Parking Assist-sensor System:
Disconnect the connector.
Remove the rear bumper assembly.
10. REMOVE REAR COMBINATION LIGHT ASSEMBLY |
Disconnect the 2 connectors and clamp.
![]() |
Remove the 3 nuts.
![]() |
Disengage the clip and remove the rear combination light assembly.
11. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP (w/ Assist Grip) |
Using a screwdriver, disengage the 3 claws and open the assist grip cover.
- HINT:
- Tape the screwdriver tip before use.
![]() |
Remove the 2 screws and luggage compartment door assist grip.
![]() |
12. REMOVE LUGGAGE COMPARTMENT DOOR COVER |
Using a clip remover, remove the 13 clips and luggage compartment door cover.
![]() |
13. REMOVE REAR LIGHT ASSEMBLY |
Disconnect the connector and clamp.
![]() |
Remove the 3 nuts.
![]() |
Disengage the clip and remove the rear light assembly.