Rear Stabilizer Bar Installation

Install the 2 rear stabilizer bushings to the outside of the stopper ring on the stabilizer bar.

Install the rear stabilizer bar No. 2 bracket.

Install the rear stabilizer bar No. 1 bracket.

Install the rear stabilizer bar with the 2 bolts. (LH Side)

Torque:

31 N*m{316 kgf*cm, 23 ft.*lbf}

Install the rear stabilizer bar with the 2 bolts. (RH Side)

Torque:

31 N*m{316 kgf*cm, 23 ft.*lbf}

Install the rear stabilizer link assembly LH with the 2 nuts.

Torque:

39 N*m{398 kgf*cm, 29 ft.*lbf}

HINT:

If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.

Install the rear stabilizer link assembly RH with the 2 nuts.

Torque:

39 N*m{398 kgf*cm, 29 ft.*lbf}

HINT:

If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.

Install a new gasket onto the front exhaust pipe.

Install the center exhaust pipe assembly with the 2 bolts and 2 nuts.

Torque:

43 N*m{438 kgf*cm, 32 ft.*lbf}

Install a new gasket to the exhaust center pipe assembly.

Install the exhaust center pipe to the exhaust front pipe with the 2 nuts and 2 bolts.

Torque:

56 N*m{571 kgf*cm, 41 ft.*lbf}

Install 2 new gaskets to the exhaust tail pipes.

Install the 2 exhaust tail pipes with the 4 nuts.

Torque:

43 N*m{438 kgf*cm, 32 ft.*lbf}