Oil Filter - Replacement

Lexus IS250 IS220d GSE20 ALE20 2AD-FHV LUBRICATION

OIL FILTER - REPLACEMENT

  • NOTICE:
Prolonged and repeated contact with mineral oil will result in the loss of natural oil from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.
Wear protective clothing and gloves. Avoid contact with used oil. If contact occurs, wash the area thoroughly with soap or waterless hand cleaner. Never use gasoline, thinners, or solvents to wash the skin.
In order to protect the environment, dispose of used oil and used oil filters at designated disposal sites only.
1. REMOVE OIL FILTER ELEMENT SERVICE HOLE COVER
Oil Filter - Replacement. 2AD-FHV LUBRICATION. Lexus IS250 IS220d GSE20 ALE20

Remove the 3 screws from the oil filter element service hole cover.

2. REMOVE ENGINE OIL

Remove the oil pan drain plug and gasket, and drain the engine oil into a container.

3. REMOVE OIL FILTER CAP ASSEMBLY
Oil Filter - Replacement. 2AD-FHV LUBRICATION. Lexus IS250 IS220d GSE20 ALE20

Using SST, remove the oil filter cap assembly.

  • SST
  • 09228-06501
  • HINT:
  • Use a container to catch the draining oil. After the oil filter cap is loosened approximately 4 turns and the cap ribs are vertical, engine oil drains from the gap between the oil filter cap and oil pan.
4. REMOVE OIL FILTER ELEMENT
Oil Filter - Replacement. 2AD-FHV LUBRICATION. Lexus IS250 IS220d GSE20 ALE20

Remove the oil filter element and the O-ring from the oil filter cap assembly.

5. INSTALL OIL FILTER ELEMENT
Oil Filter - Replacement. 2AD-FHV LUBRICATION. Lexus IS250 IS220d GSE20 ALE20

Clean the inside of the oil filter cap assembly, the threads and O-ring groove.

Apply a small amount of engine oil to a new O-ring and install it to the oil filter cap assembly.

Set a new oil filter element in the oil filter cap assembly.

Remove any dirt or foreign matter from the installation surface of the engine.

Apply a small amount of engine oil to the O-ring again.

6. INSTALL OIL FILTER CAP ASSEMBLY
Oil Filter - Replacement. 2AD-FHV LUBRICATION. Lexus IS250 IS220d GSE20 ALE20

Using SST, tighten the oil filter cap assembly.

  • SST
  • 09228-06501
  • Torque:
  • 40 N*m{ 408 kgf*cm, 30 ft.*lbf}
  • NOTICE:
  • Check and clean the oil filter installation surface.
7. ADD ENGINE OIL

Install the oil pan drain plug with a new gasket.

  • Torque:
  • 38 N*m{ 388 kgf*cm, 28 ft.*lbf}

Add engine oil according to the table below.

  • Standard capacity:
  • ItemCapacity
    Drain and refill with oil filter change6.0 liters (6.3 US qts, 5.3 lmp. qts)
    Drain and refill without oil filter change5.2 liters (5.5 US qts, 4.6 lmp. qts)
    Dry fill6.7 liters (7.1 US qts, 5.9 lmp. qts)
8. CHECK FOR ENGINE OIL LEAKS

Start the engine. Make sure that there are no oil leaks from the connection point of the oil filter cap assembly.

9. CHECK ENGINE OIL LEVEL
10. INSTALL OIL FILTER ELEMENT SERVICE HOLE COVER
Oil Filter - Replacement. 2AD-FHV LUBRICATION. Lexus IS250 IS220d GSE20 ALE20

Install the oil filter element service hole cover with the 3 screws.