Generator Disassembly

Tighten SST 1-B to the specified torque, and then fix SST 1-A on the generator rotor shaft.

Torque:

39 N*m{400 kgf*cm, 29 ft.*lbf}

NOTICE:

Securely fix SST on the generator rotor shaft.

Clamp SST 2 in a vise.

Insert SST 1-A and B into SST 2, and then fix the generator pulley nut into SST 2.

Turn SST 1-A in the direction shown, and then loosen the generator pulley nut.

NOTICE:

If the generator pulley nut is turned by more than a half turn, the generator rotor shaft may be damaged.

Remove the generator from SST 2.

Fix SST 1-B in place, and then loosen SST 1-A in the direction shown. Remove SST 1-A and B from the generator.

Remove the generator pulley nut and generator pulley.

Remove the 3 nuts and generator rear end cover.

Remove the terminal insulator.

Remove the 2 screws and generator brush holder.

Remove the bolt and cord clip.

Remove the 4 bolts.

Using SST, remove the coil.

SST

09950-40011(09951-04020,09952-04010,09953-04020,09954-04010,09955-04071,09957-04010)

Remove the generator rotor from the generator.

Remove the washer.