Lexus IS250 IS220d GSE20 ALE20-4GR-FSE EMISSION CONTROL-VACUUM SWITCHING VALVE (for EVAP)-Vacuum Switching Valve (For Evap) - Installation

Lexus IS250 IS220d GSE20 ALE20 4GR-FSE EMISSION CONTROL

VACUUM SWITCHING VALVE (for EVAP) - INSTALLATION

1. INSTALL VACUUM SWITCHING VALVE (for EVAP)
Vacuum Switching Valve (For Evap) - Installation. 4GR-FSE EMISSION CONTROL. Lexus IS250 IS220d GSE20 ALE20

Install the VSV to the intake air connector.

Connect the 2 hoses.

Connect the connector with the clamp.

2. INSTALL V-BANK COVER SUB-ASSEMBLY
Vacuum Switching Valve (For Evap) - Installation. 4GR-FSE EMISSION CONTROL. Lexus IS250 IS220d GSE20 ALE20

Engage the 2 clips on the front of the cover, and then engage the clip on the rear to install the V-bank cover.

  • NOTICE:
Be sure to engage the clips securely.
Do not apply excessive force or do not hit the cover to engage the clips. This may cause the cover to break.