Lexus IS250 IS220d GSE20 ALE20-4GR-FSE EMISSION CONTROL-VACUUM SWITCHING VALVE (for EVAP)-Vacuum Switching Valve (For Evap) - Installation

Lexus IS250 IS220d GSE20 ALE20 4GR-FSE EMISSION CONTROL

VACUUM SWITCHING VALVE (for EVAP) - INSTALLATION

1. INSTALL VACUUM SWITCHING VALVE (for EVAP)
Vacuum Switching Valve (For Evap) - Installation. 4GR-FSE EMISSION CONTROL. Lexus IS250 IS220d GSE20 ALE20

Install the VSV to the intake air connector.

Connect the 2 hoses.

Connect the connector with the clamp.

2. INSTALL V-BANK COVER SUB-ASSEMBLY
Vacuum Switching Valve (For Evap) - Installation. 4GR-FSE EMISSION CONTROL. Lexus IS250 IS220d GSE20 ALE20

Engage the 2 clips on the front of the cover, and then engage the clip on the rear to install the V-bank cover.

  • NOTICE:
Be sure to engage the clips securely.
Do not apply excessive force or do not hit the cover to engage the clips. This may cause the cover to break.
LEXUS IS250, IS220d / GSE20 ALE20