CHECK YAW RATE AND ACCELERATION SENSOR INSTALLATION
DTC C1420 Acceleration Sensor Malfunction |
DESCRIPTION
Refer to DTCs C1419 and C1435 (LandCruiser RM0000035P408IX_01.html).| DTC Code | DTC Detection Condition | Trouble Area |
| C1420 | After the difference between GL1 and GL2 becomes 0.6 G or more with the vehicle stationary, the difference remains 0.4 G or more for 60 seconds or more. |
|
WIRING DIAGRAM
Refer to DTCs C1232, C1243 and C1245 (LandCruiser RM000001EA302PX_02.html).INSPECTION PROCEDURE
- NOTICE:
- When replacing the yaw rate and acceleration sensor, perform calibration (LandCruiser RM00000452J00ZX.html).
- HINT:
- When DTC U0123, U0124 and/or U0126 is output together with DTC C1420, inspect and repair the trouble areas indicated by DTC U0123, U0124 and/or U0126 first (LandCruiser RM000000YUO0SYX.html).
| 1.CHECK YAW RATE AND ACCELERATION SENSOR INSTALLATION |
Check that the yaw rate and acceleration sensor is installed properly (LandCruiser RM000000SS507KX.html).
- OK:
- The sensor is tightened to the specified torque.
- The sensor is not installed at an angle.
|
| ||||
| OK | ||
| ||