Clutch Master Cylinder (For Lhd) -- Removal |
| 1. DRAIN BRAKE FLUID FROM CLUTCH LINE |
| 2. DISCONNECT CLUTCH RESERVOIR TUBE |
 |
Disconnect the clutch reservoir tube.
- HINT:
- Use a container to collect the fluid.
| 3. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE |
 |
Using a union nut wrench, disconnect the flexible hose tube.
- HINT:
- Use a container to collect the fluid.
| 4. REMOVE DRIVER SIDE JUNCTION BLOCK ASSEMBLY |
Remove the driver side junction block (LandCruiser RM000003WBO05FX.html).
| 5. REMOVE CLUTCH PEDAL WITH CLUTCH MASTER CYLINDER |
Disconnect the clutch start switch connector.
w/ Cruise Control:
Disconnect the clutch switch connector.
Remove the 2 nuts, bolt and clutch pedal with clutch master cylinder.
 |
| 6. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY |
Disconnect the clutch reservoir hose.
 |
Using a union nut wrench, disconnect the flexible tube.
 |
Remove the nut and clutch start switch from the clutch pedal support.
 |
Remove the clip and pin, and separate the push rod clevis from the clutch pedal.
 |
Remove the 2 bolts and clutch master cylinder.
 |