Sliding Roof System - How To Proceed With Troubleshooting

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SLIDING ROOF / CONVERTIBLE


SLIDING ROOF SYSTEM - HOW TO PROCEED WITH TROUBLESHOOTING

  • HINT:
Use these procedures to troubleshoot the sliding roof system.
*: Use the intelligent tester.

1.VEHICLE BROUGHT TO WORKSHOP
NEXT
2.INSPECT BATTERY VOLTAGE
  • Standard Voltage:
  • 11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT
3.CHECK LIN COMMUNICATION SYSTEM*

Using the intelligent tester, check if the LIN communication system is functioning normally.

Result
ResultProceed to
LIN communication system DTC is not outputA
LIN communication system DTC is outputB
B.
Go to LIN COMMUNICATION SYSTEM ()
A
4.PROBLEM SYMPTOMS TABLE

Refer to the problem symptoms table ().

Result
ResultProceed to
Fault is not listed in problem symptoms tableA
Fault is listed in problem symptoms tableB
B.
Go to step 6
A
5.OVERALL ANALYSIS AND TROUBLESHOOTING*

Operation Check ().

Terminals of ECU ().

Data List / Active Test ().

NEXT
6.ADJUST, REPAIR OR REPLACE
NEXT
7.INITIALIZATION

Initialization ().

NEXT
8.CONFIRMATION TEST
NEXT
END