Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SLIDING ROOF / CONVERTIBLE
SLIDING ROOF SYSTEM - HOW TO PROCEED WITH TROUBLESHOOTING
- HINT:
Use these procedures to troubleshoot the sliding roof system.
*: Use the intelligent tester.
1.VEHICLE BROUGHT TO WORKSHOP |
|
2.INSPECT BATTERY VOLTAGE |
- Standard Voltage:
- 11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
|
3.CHECK LIN COMMUNICATION SYSTEM* |
Using the intelligent tester, check if the LIN communication system is functioning normally.
Result | Proceed to |
LIN communication system DTC is not output | A |
LIN communication system DTC is output | B |
|
| ||||
|
4.PROBLEM SYMPTOMS TABLE |
Refer to the problem symptoms table ().
Result | Proceed to |
Fault is not listed in problem symptoms table | A |
Fault is listed in problem symptoms table | B |
|
| ||||
|
5.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Operation Check ().
Terminals of ECU ().
Data List / Active Test ().
|
6.ADJUST, REPAIR OR REPLACE |
|
7.INITIALIZATION |
Initialization ().
|
8.CONFIRMATION TEST |
| ||||
|
---|