Kinetic Dynamic Suspension System How To Proceed With Troubleshooting

  1. VEHICLE BROUGHT TO WORKSHOP

  2. CUSTOMER PROBLEM ANALYSIS

  3. INSPECT BATTERY VOLTAGE

  4. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

  5. CHECK AND CLEAR DTC*

  6. PROBLEM SYMPTOM CONFIRMATION

  7. SYMPTOM SIMULATION

  8. CHECK DTC*

  9. PROBLEM SYMPTOMS TABLE

  10. DTC CHART

  11. CIRCUIT INSPECTION

  12. IDENTIFICATION OF PROBLEM

  13. REPAIR OR REPLACE

  14. CONFIRMATION TEST

Kinetic Dynamic Suspension System -- How To Proceed With Troubleshooting


HINT:
*: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

      NEXT


      3.INSPECT BATTERY VOLTAGE
        Standard voltage:
        11 to 14 V
        If the voltage is below 11 V, recharge or replace the battery before proceeding.

      NEXT


      4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

      1. Using the intelligent tester, inspect the CAN communication function to make sure there are no malfunctions in the communication system (for LHD: LandCruiser RM000000WIB0ECX.html, for RHD: LandCruiser RM000000WIB0EEX.html).

        Result
        Result
        		Proceed to
        CAN DTC is not output
        		A
        CAN DTC is output
        		B



      		B.
      GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)
      A


      5.CHECK AND CLEAR DTC*

      1. Check for DTCs (LandCruiser RM000001N9I01KX.html).


      NEXT


      6.PROBLEM SYMPTOM CONFIRMATION
        Result
        Result
        		Proceed to
        Symptom does not occur
        		A
        Symptom Occurs
        		B


      		B.
      Go to step 9
      NEXT


      7.SYMPTOM SIMULATION

        NEXT


        8.CHECK DTC*

        1. Check for DTCs (LandCruiser RM000001N9I01KX.html).

          Result
          Result
          		Proceed to
          DTC not output
          		A
          DTC output
          		B



        		B.
        Go to step 10
        A


        9.PROBLEM SYMPTOMS TABLE

        1. Refer to the Problem Symptoms Table (LandCruiser RM0000046H200OX.html).


        NEXT

        Go to step 12


        10.DTC CHART

        1. Refer to the Diagnostic Trouble Code Chart (LandCruiser RM000001N8Y01VX.html).


        NEXT


        11.CIRCUIT INSPECTION

          NEXT


          12.IDENTIFICATION OF PROBLEM

            NEXT


            13.REPAIR OR REPLACE

              NEXT


              14.CONFIRMATION TEST

                NEXT

                END