REMOVE MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission)
REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)
REMOVE PUMP IMPELLER DRIVE PLATE (for Automatic Transmission)
Rear Crankshaft Oil Seal -- Removal |
| 1. REMOVE MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission) |
Remove the manual transmission (LandCruiser RM00000178S014X.html).
| 2. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission) |
Remove the automatic transmission (LandCruiser RM0000013F601QX.html).
| 3. REMOVE CLUTCH COVER ASSEMBLY (for Manual Transmission) |
 |
Place matchmarks on the clutch cover and flywheel.
Text in Illustration *a Matchmark
Loosen each set bolt one turn at a time until spring tension is released.
Remove the 6 set bolts and pull off the clutch cover.
- NOTICE:
- Do not drop the clutch disc.
| 4. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transmission) |
- NOTICE:
- Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.
| 5. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transmission) |
Using SST, hold the crankshaft pulley.
- SST
- 09213-58014
09330-00021
 |
Remove the 8 bolts and flywheel.
| 6. REMOVE PUMP IMPELLER DRIVE PLATE (for Automatic Transmission) |
Using SST, hold the crankshaft pulley.
- SST
- 09213-58014
09330-00021
|
Remove the 8 bolts, the rear drive plate spacer, the pump impeller drive plate, and the flywheel and ring gear.
 |
| 7. REMOVE REAR CRANKSHAFT OIL SEAL |
Using a knife, cut off the lip of the rear crankshaft oil seal.
Text in Illustration *1 Cut Position
 |
Using a screwdriver, pry out the rear crankshaft oil seal.
- NOTICE:
- Be careful not to damage the crankshaft.