Display the "Display" screen.

Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check ().

The multi-display assembly and multi-media module receiver assembly are connected by an AVC-LAN communication line.

When an AVC-LAN communication error occurs between the multi-media module receiver assembly and multi-display assembly, these DTCs will be stored.

The multi-media module receiver assembly and television display assembly are connected by the MOST communication line.

When a MOST communication error occurs between the multi-media module receiver assembly and television display assembly, these DTCs will be stored.

The multi-media module receiver assembly and stereo component amplifier assembly are connected by the MOST communication line.

When a MOST communication error occurs between the multi-media module receiver assembly and stereo component amplifier assembly, these DTCs will be stored.

This DTC is stored when the MOST network cannot be established after the master unit is activated.

The multi-media module receiver assembly receives a vehicle speed signal from the combination meter assembly and information from the navigation antenna, and then adjusts the vehicle position on the map. The multi-media module receiver assembly stores this DTC when the difference between the speed information that the navigation antenna assembly*1 or telephone antenna assembly*2 receives and the SPD pulse received from the combination meter assembly becomes large.

These DTCs are stored when a malfunction occurs in the CAN communication circuit.

These DTCs are stored when a malfunction occurs in the navigation antenna assembly (w/o Roof Antenna) or telephone antenna assembly (w/ Roof Antenna).

This DTCs is stored when a malfunction occurs in the park assist/monitoring section.