Pay attention to the following points when servicing.

Use the Data List to check if the door lock positions are functioning properly ().

The video signal from the rear television camera assembly is transmitted to the multi-media module receiver assembly.

This DTC is stored when the multi-media module receiver assembly judges that the back camera initial setting has not been memorized (rear television camera optical axis adjustment is incomplete).

This DTC is stored if the multi-media module receiver assembly judges as a result of its self check that the vehicle information received via CAN communication and the vehicle information stored in the multi-media module receiver assembly do not match.

This DTC is set when the multi-media module receiver assemblies self-diagnosis determines that the connection with the steering control ECU of the variable gear ratio steering system (via CAN communication) is inoperative.

This DTC is stored if the multi-media module receiver assembly receives a signal via CAN communication from the steering sensor that indicates an internal malfunction.

These DTCs are stored if there is a malfunction in the CAN communication system connected to the multi-media module receiver assembly.

This DTC is stored if the navigation receiver assembly receives a signal via CAN communication from the steering sensor that indicates a power supply problem.

This DTC is stored when the multi-media module receiver assembly judges that the maximum steering angle has not been memorized (steering angle setting is incomplete).