Dtc C1626 Steering Sensor Malfunction

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - PARK ASSIST / MONITORING

DESCRIPTION

INSPECTION PROCEDURE

REPLACE STEERING SENSOR

CHECK FOR DTC

DTC C1626 Steering Sensor Malfunction

DESCRIPTION

This DTC is stored if the multi-media module receiver assembly receives a signal via CAN communication from the steering sensor that indicates an internal malfunction.

DTC CodeDTC Detection ConditionTrouble Area
C1626 A fail flag is transmitted from the steering angle sensor.
Steering sensor
Multi-media module receiver assembly

INSPECTION PROCEDURE

  • NOTICE:
When "System initializing" is displayed on the multi-media module receiver assembly after disconnecting the cable from the negative (-) battery terminal, correct the steering angle neutral point ().
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system (w/o Side Monitor System) may be needed ().
1.REPLACE STEERING SENSOR

Replace the steering sensor with a normally functioning one ().

NEXT
2.CHECK FOR DTC

Clear the DTCs ().

Check for DTCs ().

  • OK:
  • DTC C1626 is not output.
NG
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY ()
OK
END (STEERING SENSOR IS DEFECTIVE)