Dtc B2282 Vehicle Speed Signal Malfunction
The main body ECU and the combination meter are connected with a cable and the CAN communication line. DTC B2282 is stored when signals, transmitted through the cable and communication line, do not match.
Dtc B2272 Ignition 1 Monitor Malfunction
This DTC is stored when a malfunction occurs in the IG1D output circuit, which is between the IG1 No. 3 relay actuation circuit inside the main body ECU and the IG1 No. 3 relay.
Dtc B2281 P Signal Malfunction
This DTC is stored when there is an abnormal circuit between the main body ECU and the shift lock control ECU.
Dtc B2271 Ignition Hold Monitor Malfunction
This DTC is stored when the IG output circuits inside the main body ECU are open or shorted.
Entry And Start System (For Start Function) - Diagnostic Trouble Code Chart
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 THEFT DETERRENT / KEYLESS ENTRY
Entry And Start System (For Start Function) - Data List / Active Test
Connect the intelligent tester to the DLC3.
Entry And Start System (For Start Function) - Dtc Check / Clear
Connect the intelligent tester to the DLC3.
Entry And Start System (For Start Function) - Terminals Of Ecu
Disconnect the E1, E2 and 2D main body ECU connectors.
Entry And Start System (For Start Function) - Problem Symptoms Table
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 THEFT DETERRENT / KEYLESS ENTRY
Entry And Start System (For Start Function) - Customize Parameters
Connect the intelligent tester to the DLC3.