Engine Immobiliser System (W/ Entry And Start System) - Terminals Of Ecu
Disconnect the E18 switch connector.
Engine Immobiliser System (W/ Entry And Start System) - Problem Symptoms Table
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 THEFT DETERRENT / KEYLESS ENTRY
Engine Immobiliser System (W/ Entry And Start System) - How To Proceed With Troubleshooting
Check for DTCs and make a note of any codes that are output ().
Engine Immobiliser System (W/ Entry And Start System) - System Description
Using the entry function (for Manual Transmission)
Engine Immobiliser System (W/ Entry And Start System) - System Diagram
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 THEFT DETERRENT / KEYLESS ENTRY
Engine Immobiliser System (W/ Entry And Start System) - Parts Location
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 THEFT DETERRENT / KEYLESS ENTRY
Engine Immobiliser System (W/ Entry And Start System) - Precaution
When using the intelligent tester with the engine switch off to troubleshoot: Connect the intelligent tester to the vehicle, and turn a courtesy light switch on and off at 1.5 second intervals until communication between the intelligent tester and vehicle begins.
Entry And Start System (For Start Function) - Engine Switch Indicator Circuit
Engine switch condition (power source mode) or system malfunctions can be checked by observing the status of the engine switch indicator light.
Entry And Start System (For Start Function) - Engine Does Not Start
When the engine switch is pressed with the brake pedal depressed and the shift lever in P (for A/T) or the clutch pedal depressed (for M/T), the main body ECU determines that it is an engine start request.
Entry And Start System (For Start Function) - Power Source Mode Does Not Change
When the certification ECU (smart key ECU assembly) has detected the key inside the cabin before the brake pedal (for A/T) or clutch pedal (for M/T) is depressed, the power source mode can be changed in the following order sequentially by pressing the engine switch: off → on (ACC) → on (IG) → off.