Theft Deterrent System (W/O Entry And Start System) - Security Indicator Light Circuit
Connect the intelligent tester to the DLC3.
Theft Deterrent System (W/O Entry And Start System) - Security Horn Circuit
When the theft deterrent system is switched from the armed state to the alarm sounding state, the main body ECU (cowl side junction block assembly LH) transmits a signal to cause the security horn to sound at intervals of 0.4 seconds.
Theft Deterrent System (W/O Entry And Start System) - Engine Hood Courtesy Switch Circuit
Connect the intelligent tester to the DLC3.
Theft Deterrent System (W/O Entry And Start System) - Data List / Active Test
Connect the intelligent tester to the DLC3.
Theft Deterrent System (W/O Entry And Start System) - Terminals Of Ecu
Disconnect the 2A, 2B, 2D and E4 main body ECU connectors.
Theft Deterrent System (W/O Entry And Start System) - Problem Symptoms Table
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 THEFT DETERRENT / KEYLESS ENTRY
Theft Deterrent System (W/O Entry And Start System) - Customize Parameters
Connect the intelligent tester to the DLC3.
Theft Deterrent System (W/O Entry And Start System) - Operation Check
When the theft deterrent system detects that the vehicle is being tampered with, the horns sound and the hazard warning lights flash continuously.
Theft Deterrent System (W/O Entry And Start System) - How To Proceed With Troubleshooting
If the voltage is below 11 V, recharge or replace the battery before proceeding.