Apply a light coat of gear oil to the No. 2 transmission hub sleeve and No. 2 transmission clutch hub.

Using a dial indicator and 2 V-blocks, measure the shaft runout.

• Maximum Runout:
• 0.03 mm (0.00118 in.)

If the runout is more than the maximum, replace the output shaft.

Using a feeler gauge, measure the 3rd gear thrust clearance.

• Standard Clearance:
• 0.10 to 0.45 mm (0.00394 to 0.0177 in.)

If the clearance is outside the specification, replace the defective gear, spacer or shaft.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 H150F MANUAL TRANSMISSION / TRANSAXLE

Using SST and a press, install a new output shaft front bearing onto the output shaft.

Using a cylinder gauge, measure the inside diameter of the output shaft.

• Standard inside diameter:
• 45.009 to 45.025 mm (1.7720 to 1.7726 in.)

• Maximum inside diameter:
• 45.025 mm (1.7726 in.)

If the diameter exceeds the maximum, replace the output shaft.

Remove the No. 3 synchronizer ring from the output shaft.

Lexus IS250 IS220d GSE20 ALE20 RA63 MANUAL TRANSMISSION

Using SST and a press, install a new output shaft front bearing onto the output shaft.

Using a cylinder gauge, measure the inside diameter of the output shaft.

• Standard inside diameter:
• 45.009 to 45.025 mm (1.7720 to 1.7726 in.)

• Maximum inside diameter:
• 45.025 mm (1.7726 in.)

If the diameter exceeds the maximum, replace the output shaft.