Entry And Start System - Diagnostic Trouble Code Chart
Lexus IS250 IS220d GSE20 ALE20 DOOR LOCK
Entry And Start System - Data List / Active Test
Connect the intelligent tester to the DLC3.
Entry And Start System - Dtc Check / Clear
Connect the intelligent tester to the DLC3.
Entry And Start System - Diagnosis System
Smart access system with push-button start data and the Diagnostic Trouble Codes (DTCs) can be read in the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform repairs.
Entry And Start System - Terminals Of Ecu
Disconnect the P33 ECU connector.
Entry And Start System - Problem Symptoms Table
Lexus IS250 IS220d GSE20 ALE20 DOOR LOCK
Entry And Start System - Problem Symptoms Table
Lexus IS250 IS220d GSE20 ALE20 DOOR LOCK
Entry And Start System - Customize Parameters
To change the vehicle to entry unlock mode switching function, make sure the vehicle power is off and simultaneously press and hold the electrical key's LOCK switch and another electrical key switch for 5 seconds.
Entry And Start System - How To Proceed With Troubleshooting
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
Entry And Start System - System Description
In addition to conventional mechanical key and wireless door lock control functions, the entry and start system enables door locking / unlocking, steering lock releasing, engine starting and luggage compartment door opening without operating the electrical key. The only requirement is that the electrical key is in the user's possession.