Dtc U0122 Lost Communication With Vehicle Dynamics Control Module


DESCRIPTION

INSPECTION PROCEDURE

CHECK CAN COMMUNICATION SYSTEM

DTC U0122 Lost Communication with Vehicle Dynamics Control Module

DTC U0123 Lost Communication with Yaw Rate Sensor Module

DTC U0126 Lost Communication with Steering Angle Sensor Module

DTC U0140 Lost Communication with Main Body ECU

DTC U0151 Lost Communication with Airbag ECU

DTC U1100 Lost Communication with Seat Belt Control ECU


DESCRIPTION

These DTCs are stored when a communication malfunction occurs between the sensors and ECUs that detect collisions, or between ECUs that perform pre-crash control.

DTC Code
DTC Detection Condition
Trouble Area
U0122
While the ignition switch is ON, communication stops between the skid control ECU and driving support ECU or seat belt control ECU for 1 second or more.
  1. Master cylinder solenoid (Skid control ECU)
  2. CAN communication system
  3. Seat belt control ECU
  4. Driving support ECU
U0123
While the ignition switch is ON, communication stops between the yaw rate sensor and driving support ECU for 1 second or more.
  1. Yaw rate sensor
  2. CAN communication system
  3. Driving support ECU
U0126
While the ignition switch is ON, communication stops between the steering angle sensor and driving support ECU for 1 second or more.
  1. Steering angle sensor
  2. CAN communication system
  3. Driving support ECU
U0140
While the ignition switch is ON, communication stops between the main body ECU and seat belt control ECU for 1 second or more.
  1. Main body ECU (Multiplex network body ECU)
  2. CAN communication system
  3. Seat belt control ECU
U0151
While the ignition switch is ON, communication stops between the center airbag sensor assembly and seat belt control ECU for 1 second or more.
  1. Center airbag sensor assembly
  2. CAN communication system
  3. Seat belt control ECU
U1100
While the ignition switch is ON, communication stops between the seat belt control ECU and driving support ECU for 1 second or more.
  1. Seat belt control ECU
  2. CAN communication system
  3. Driving support ECU

INSPECTION PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM

  1. Select "Bus Check" from the "System Select" screen on the intelligent tester.

  1. Select "Communication Malfunction DTC" from the "Bus Check" screen, and then select "Enter".

    Result
    Result
    		Proceed to
    CAN DTC is not output
    		A
    CAN DTC is output (for LHD with Entry and Start System)
    		B
    CAN DTC is output (for LHD without Entry and Start System)
    		C
    CAN DTC is output (for RHD with Entry and Start System)
    		D
    CAN DTC is output (for RHD without Entry and Start System)
    		E



B
GO TO CAN COMMUNICATION SYSTEM (LandCruiser RM000000WIB0ECX.html)

C
GO TO CAN COMMUNICATION SYSTEM (LandCruiser RM000000WIB0EDX.html)

D
GO TO CAN COMMUNICATION SYSTEM (LandCruiser RM000000WIB0EEX.html)

E
GO TO CAN COMMUNICATION SYSTEM (LandCruiser RM000000WIB0EFX.html)
A

USE SIMULATION METHOD TO CHECK (LandCruiser RM000003YMJ00XX.html)